Key Features:
• Latest-generation Radiation Boundary Integrator®
and HF waveguide
technology delivers incredibly precise horizontal and vertical coverage
with increased HF output from three patented D2 Dual Diaphragm Dual
Voice Coil high frequency drivers
• Differential Drive™, Dual Neodymium Magnet, Dual Voice Coil, Direct
Cooled™ MF and LF transducers
• Patented JBL S.A.F.E. fixed angle tension suspension system
streamlined for speed and efficiency with fewer pinning operations.
Ergonomic dolly board and protective cover available for convenient
transport of individual enclosures.
• BSS®
Audio OmniDriveHD V5 Processing for use with Crown Audio
ITechHD or VRack via JBL HiQnet Performance Manager Control™
Description:
The VTX V25-II is a full size, high-output line array element designed to deliver maximum acoustic output with the highest possible fidelity in a wide variety
of sound reinforcement applications. Based around industry-leading JBL transducer technology, including the patented D2 Dual Diaphragm Dual Voice
Coil high frequency driver, VTX V25-II delivers premium performance with a remarkably high power to weight ratio. JBL HiQnet Performance Manager™
control enables fast, accurate system configuration and deployment, while BSS®
Audio OmniDrive HD V5 processing provides clear, consistent sound in any
configuration. Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware.
VTX V25-II
High Performance Dual 15” Line Array Element SPECSHEET
Fixed Angle ASM Suspension System
System
Frequency Range (-10 dB): 35 Hz - 18 kHz (short throw mode, free field)
Coverage Pattern (-6dB) Horizontal:
Vertical:
90 degrees nominal (300 Hz - 16 kHz)
Varies with array size and configuration (0-10
degree inter-enclosure angles)
System Input Power Rating:
Active LF: 2 x 2000 W Continuous (AES / 2 hour)
MF: 1400 W Continuous (AES / 2 hour)
HF: 600 W Continuous (AES / 2 hour)
Bandpass Sensitivity: LF: 99 dB 1W / 1m (2.0 Vrms at 3.3 ft) free field
MF: 103 dB 1W / 1m (2.83 Vrms at 3.3ft)
HF: 116 dB 1W / 1m (2.83 Vrms at 3.3ft)
Maximum Peak Output²: 141 dB SPL (LF), 140.5 dB SPL (MF), 149.5 dB
SPL (HF)
Required Amplification &
Processing:
Crown® I-TechHD or VRack power amplification
JBL HiQnet Performance Manager™ system
control
System Impedance: LF: 2 x 8 ohms
MF: 1 x 8 ohms
HF: 1 x 8 ohms
Transducers
Low Frequency: 2 x 2267H, 381 mm (15 in) dia., 100mm (4 in)
Dual Voice Coil, Neodymium Differential Drive®,
Direct Cooled™
Mid Frequency: 4 x 2169H, 203 mm (8 in) dia., 76mm (3 in) Dual
Voice Coil, Neodymium Differential Drive®, Direct
Cooled™
High Frequency: 3 x 2430K D2 Dual Diaphragm Dual Voice Coil
Compression Driver, 76 mm (3 in) dia. dual voice
coils, 38 mm (1.5 in) exit
Enclosure
Construction: Cast aluminum front baffle. 18 mm, 11-ply
Finnish birch plywood; black DuraFlex™ finish;
integral recessed handles
Suspension: Fixed angle ASM suspension system: 0, 1, 2, 3,
4, 5, 6, 7, 8, 9, 10 degree inter-enclosure angle
options
Grille: Powder coated 14 gauge hex-perforation steel
with acoustically-transparent black cloth backing
Input Connectors: Neutrik® Speakon® NL-8 (2x)
LF1: 1+/-, LF2: 2+/-, MF: 3+/-, HF: 4+/-
Dimensions (H x W x D): 414 mm x 1223.5 mm x 614 mm
(16.3 in x 48.2 in x 24.2 in)
Net Weight: 82.6 kg (182 lbs)
Speciications:
Footnotes:
1: AES Standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air.
2: Calculated maximum SPL based on rated peak power and measured sensitivity.
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine
expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless
otherwise stated.