24001中号3.6海德薇遥控灯光安装教程

24001 Medium 3.6 Hedwig remote lighting installation tutorial

灯光材料如下

拿出A包灯光

Take out package A lights

Lighting materials are as follows

将灯条如下图安装

Install the light bar as shown below

拿出B包灯光

Take out package B lights

将B包灯条如下图安装

Install the B pack light strip as shown in the following figure

拿出C包灯光

将透明瓶拿出

Take out the clear bottle

Take out the C pack lights

把积木拆起,灯光安装如下

Remove the blocks and install the lights as follows

将两个透明瓶放还原位

将接下去的2灯灯条安装如下

Install the next 2 light strips as follows

Put the two clear bottles back in place

剩下的2节1灯灯条安装如下

The remaining 2 section 1 light strips are installed as follows

把海德威的头部位置拆起

Remove Hedway's head position

如下图，将积木拆起

把2节1灯灯条安装如下

Install the 2 section 1 light strip as follows

Remove the blocks as shown below

积木安装还原

Building block installation and restoration

拿出D包其中一条灯光【D包一共两条】

Take out one of the lights in the D package [there are two

D packages]

把翅膀拆起如下

把第一节2灯灯条安装如下

Install the first section 2 light strip as follows

Remove the wings as follows

第二节2灯灯条安装如下

第三节3灯灯条安装如下

Section 3 3 Light The following table describes the

installation of the light bar

Section 2 2 Lights The light bar is installed as follows

第四节3灯灯条安装如下

第五节3灯灯条安装如下

Section 5 3 Lights Install the light bar as follows

Section 4 3 Indicators Install the light bar as follows

如图所示，将翅膀安装还原

Reinstall the wings as shown

拿出D包另外一条灯光【D包一共两条】

Take out the D bag and another light [D bag altogether two]

将第一节2灯灯条安装如下

第二节2灯灯条安装如下

Section 2 2 Lights The light bar is installed as follows

Install the first section 2 light strip as follows

第三节3灯灯条安装如下

第四节3灯灯条安装如下

Section 4 3 Indicators Install the light bar as follows

Section 3 3 Light The following table describes the

installation of the light bar

第五节3灯灯条安装如下

随后将翅膀重新安装还原

The wings are then reinstalled and restored

Section 5 3 Lights Install the light bar as follows

将所有灯光插头接入连接板内

接入电池

Access battery

Plug all light plugs into the connector

电池充电

battery charge