－ 72 －
PA0444-DC0018-DS8010
PA0444-SD8010
感温组件 感温组件
1、当打开热水控制开关慢慢往上调节水温，
水温在38℃（±2℃）以下时感温开关阀出水
通道是开放的通路，此时淋浴终端出水水温
低于38℃。
2、当调节的水温达到/超过38℃（±2℃）时，
感温开关阀的出水通道因内部感温组件动
作而关闭了，此时通路止水了。即告诉用户
终端出水水温已达到/超过38℃（±2℃）。
3、当旋转感温开关阀旋钮，内部感温组件将重新打开
出水通道，此时淋浴终端出水水温将达到/超过38℃（
±2℃）。当淋浴结束，关闭进水端，感温开关阀的旋钮
将随着感温组件的散热，温度降低，复位到初始状态。
When the hot water control switch is slowly adjusted up,
the water temperature is opened when the water
temperature is below 38 ℃ (± 2 ℃) below (± 2 ℃).
When the adjusted water temperature reaches/exceeds
38 ° C (± 2 ° C), the water outlet channel of the
temperature switch valve is closed due to the internal
temperature sensing component movement. At this time,
the path stops. That is, the water temperature of the
terminal out of the terminal has reached/more than 38 °
C (± 2 ° C).
When the rotating temperature switch valve knob, the internal
temperature sensing component will re -open the water passage. At this
time, the water temperature of the shower terminal will reach/exceed 38
° C (± 2 ° C). When the shower is over, the water intake end is closed, and
the knob of the temperature switch valve will be reduced with the heat
dissipation of the temperature sensing component, and the temperature
will be reduced to the initial state.
感温开关阀工作原理
The working principle of the temperature switch valve
37mm 80mm
65mm
40mm
72mm
26mm
PA0444
Temperature switch valve
DC0018
Shower holder
new
