www.horadgroup.cn 48
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L: 2500-1650mm，W: 980-1400mm
电源 Voltage AC 380V3相5线制 50Hz DC 24V 3-phase 5-wire
功率 Power ≤0.4kW
重量 Weight 1t
外形尺寸 Overall Dimensions (L*W*H) 3400*2000*1900mm
最大加工厚度 Maximum Processing Thickness 1.6-5mm
4.20 固化线/固化房
Curing Line/Curing Room
技术性能 Technical Performance
1. 采用高强度，高负载特种链条，5个支撑点位，链板有效
支撑面2600mm。
2. 采用定距离检测机构替代编码器，有效保障进给位置的可
靠性。
3. 模块式机架，现场可快速安装。
4. 有料检测，运行到位使用对射光电或行程开关，极限位使
用行程开关。
5. 固化线宽板链输送，宽度大于组件长度。
6. 承重链板必须保证四条接触面，板链承重链轮采用耐用金
属滚轮，输送线满载情况下能传输平稳，无颤抖或迟滞现象。
1.High strength and high load special chains are used. 5
support points, effective support surface of chain plate
2600mm.
2.Using a fixed distance detection mechanism to replace the
encoder effectively ,ensures the reliability of the inout position.
3.Modular racks for quick on-site installation.
4.Material detection, use photoelectric or travel switch for
operation in place, and use travel switch for limit position.
5.The load-bearing chain plate must ensure four contact
surfaces. The load-bearing chain wheel of the plate chain
adopts durable metal rollers, and can transmit smoothly
without shaking or hysteresis when the conveyor line is fully
loaded.
49 www.horadgroup.com
www.horadgroup.cn 50
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L: 2500-1650mm，W: 980-1400mm
节拍 Cycle Time ≤16s
组件类型 Panel Type 单玻、双玻 Glass-backsheet, Glass-Glass type
电源 Voltage AC 380V 三相 3 Phase
功率 Power 5.5kW
气源 Air Pressure 0.5-0.8MPa
工作方式 Way of Working 滚子链和链板输送 Roller chain and chain plate conveying
工作温度 Working Temperature 25℃±2℃
工作湿度 Working Humidity 0-90%
4.21 自动锉角机
Auto Corner Milling
技术性能 Technical Performance
1. 磨角动作同步进行；磨削余量基本相同。
2. 设有防护罩，防止铝屑影响组件。
3. 设有铝屑收集装置，防止粉尘飞溅。
4. 磨削组件铝边框棱角。
5. 归正气缸组，实现组件精准定位。
6.4台电机同步联动作业，保证各角磨削余料相同。
1. The grinding action is synchronized; the grinding allowance
is basically the same.
2.Equipped with a protective cover to prevent aluminum chips
from affecting the panels.
3.Equipped with the aluminum chip collection device to prevent
dust splashing.
4.Grinding the edges and corners of the aluminum frame of
the panel.
5.Correct the cylinder group to achieve precise positioning
of the panels.
6.Synchronous linkage operation of 4 motors to ensure the
same grinding residue at all corners.
51 www.horadgroup.com
www.horadgroup.cn 52
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L: 2500-1650mm，W: 980-1400mm
节拍 Cycle Time ≤16s
外形尺寸 Overall Dimensions (L*W*H) 3720*1750*1150mm
电源 Voltage AC380V 50Hz DC 24V
功率 Power 400W
气源 Air Pressure 0.5-0.8MPa
重量 Weight 650kg
砂带寿命 Belt Life ≥3个月 months
组件定位精度 Panel Positioning Accuracy ±0.2mm
4.22 接线盒扣盖机
Jbox Lid Capping
技术性能 Technical Performance
1. 采用视觉定位。
2. 接线盒内双组份胶体固化检查。
3. 可增配双振动盘。
4. 可选配接线盒内胶体固化拍照。
1. Using visual positioning.
2.Two component gel curing inspection inside the junction box.
3.Double vibration discs can be added.
4.Optional colloid curing photography inside the Jbox.
53 www.horadgroup.com
www.horadgroup.cn 54
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L: 1640-2500mm，W: 950-1400mm
节拍 Cycle Time ≤16s
外形尺寸 Overall Dimensions (L*W*H) 4420*1880*2000mm
电源 Voltage 三相五线380V 50Hz 10A 3-phase 5-wire
功率 Power 10kW
气源 Air Pressure 0.6-0.8MPa 800L/min
组件类型 Panel Type 单玻&双玻 Glass backsheet& Glass-Glass type
重量 Weight 1900kg
工作环境 Working Environment ≤60%（湿度）(Humidity)
工作噪音 Working Noise ≤75dB
组件定位精度 Component Positioning Accuracy ±0.5mm
合盖精度 Closing Accuracy ±0.2mm
稼动率 Utilization Rate ≥99.5%
4.23 自动上工装
Auto Testing Jig Loading
技术性能 Technical Performance
1. 组件机械归正定位、视觉影像定位工装精确坐标，实时纠
偏，定位精度：≤±1mm。
2. 兼容最大组件尺寸（1640-2500)*(996-1400)mm，兼容
工装尺寸996-1400mm，可以快速调整。
3. 杆式工装。
4. 不良率≤0.1%。
1.Accurate coordinates of panel correction positioning, visual
imaging to locate the precise coordinates of the test jigs,
real-time correction of deviation, positioning accuracy: ≤ ± 1mm.
2.Compatible with maximum panel size (1640-2500) * (996-1400) mm,
compatible with test jigs size 996-1400mm, and can be quickly
adjusted.
3.Rod type jigs.
4.Defect rate≤0.1%.
55 www.horadgroup.com
www.horadgroup.cn 56
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L:1640-2500mm*W:996-1400mm
节拍 Cycle Time ≤16s
外形尺寸 Overall Dimensions (L*W*H)
5500*2750*2350mm（工装回流线）(Test jigs return line)
4850*3000*2350mm（AGV小车）(AGV trolley)
4350*2300*2350mm（天轨小车）(Sky rail trolley)
电源 Voltage 三相五线380V 50Hz 10A 3-phase 5-wire
功率 Power 10kW
气源 Air Pressure 0.6-0.8MPa
组件类型 Panel Type 常规&单玻&双玻 Glass-Backsheet& Glass-Glass type
重量 Weight 1650kg
工作噪音 Working Noise ≤60dB
组件定位精度
Component Positioning Accuracy ±0.5mm
稼动率 Utilization Rate ≥99%
工装尺寸 Jigs Size 杆式工装
Rod type jigs
4.24 自动下工装
Auto Testing Jig Unloading
技术性能 Technical Performance
1. 组件机械归正定位、视觉影像定位工装精确坐标，实时纠
偏，定位精度：≤±1mm。
2. 兼容最大组件尺寸（1640-2500)*(996-1400)mm，兼容
工装尺寸996-1400mm，可以快速调整。
3. 杆式工装。
4. 不良率≤0.1%。
1.Accurate coordinates of panel correction positioning, visual
imaging to locate the precise coordinates of the test jigs,
real-time correction of deviation, positioning accuracy: ≤±1mm.
2.Compatible with maximum panel size (1640-2500) * (996-1400) mm,
compatible with test jigs size 996-1400mm, and can be quickly
adjusted.
3.Rod type jigs.
4.Defect rate≤0.1%.
57 www.horadgroup.com
www.horadgroup.cn 58
项目 Item
产品参数 Specification
参数 Parameter
适用组件尺寸 Panel Size L:1640-2500mm*W:996-1400mm
节拍 Cycle Time ≤16s
外形尺寸 Overall Dimensions (L*W*H)
5500*2750*2350mm（工装回流线）(Test jigs return line)
4850*3000*2350mm（AGV小车）(AGV trolley)
4350*2300*2350mm（天轨小车）(Sky rail trolley)
电源 Voltage 三相五线380V,50Hz,10A 3phase ,5 wire
功率 Power 15KW
气源 Air Pressure 0.6-0.8MPa
组件类型 Panel Type 常规&单玻&双玻 Glass-Backsheet& Glass-Glass type
重量 Weight 1650kg
工作噪音 Working Noise ≤60dB
组件定位精度
Panel Positioning Accuracy ±0.5mm
稼动率 Utilization Rate ≥99%
工装尺寸 Jigs Size 杆式工装
Rod type jigs
4.25 自动贴标机
Auto Labeling
技术性能 Technical Performance
1. 高速贴标，配备两台独立贴标头，独立完成铭牌、边框条
码的贴附作业。
2. 自动触发扫码枪扫描玻璃面条码+MES系统信息交互驱动
打印标签，扫码成功率99.9%。
3. 兼容横向与纵向贴标，兼容单体接线盒及三分体线盒贴标。
4. 良率＞99.9%。
5. 标签材料为主流亚银PET。
1.High speed labeling, equipped with two independent
labeling heads to independently complete the attachment
of nameplates and frame barcodes.
2.Automatically trigger the scanning gun to scan the code on
the glass side+MES system information interaction to drive the
printing of labels, labeling yield ≥99.9%.
3.Compatible with horizontal and vertical labeling, compatible
with several J-box types
4.Yield rate＞99.9%.
5.Label material/Sub-silver PET (mainstream).
59 www.horadgroup.com
www.horadgroup.cn 60
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L:1640-2500mm*W:985-1450mm
节拍 Cycle Time ≤16s
外形尺寸 Overall Dimensions (L*W*H) 4200*2200*1950mm
电源 Voltage 380V 10A
功率 Power 10kW
气源 Air Pressure 0.6-0.8Mpa
组件类型 Panel Type 单玻&双玻 Glass-Backsheet, Glass-Glass type
重量 Weight 2250kg
组件定位精度 Panel Positioning Accuracy ≤±0.5mm
归正方式 Positioning Mode 气缸归正 Cylinder correction
贴标精度 Labeling Accuracy ≤±1mm
稼动率 Utilization Rate ≥99%
4.26 翻转检查
Flip Inspection
技术性能 Technical Performance
1. 伺服电机驱动，实现精准定位。
2. 吸盘与夹爪同步工作，保证翻转时组件安全稳定。
3. 设备整机具备安全防护网，安全可靠，操作简单、灵活。
4. 设有保护光电，保证组件与人员安全。
5. 设有多个光源点，便于人员观察组件（可选配）。
1.Servo motor drive for precise positioning.
2.The sucker and clamping jaw work synchronously to ensure
the safety and stability of flipping panels.
3.Equipped with a safety net, safe and reliable, easy and
flexible to operate.
4.Equipped with protective optoelectronics to ensure the
safety of panels and personnel.
5.Equipped with multiple light source points to facilitate
personnel to observe the panel(Optional).
61 www.horadgroup.com
www.horadgroup.cn 62
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L: 2500-1650mm，W: 980-1400mm
组件传输方向 Panel Transmission Direction Short side
外形尺寸 Overall Dimensions (L*W*H) 2900*1710*2025mm
重量 Weight 750kg
功率 Power 1.3kW
翻转效果 Flipping Effect Smooth and stable
稼动率 Utilization Rate ≥99%
4.27 自动包护角机
Auto Corner Protection Inserting
技术性能 Technical Performance
1. 版型切换简单易操作。
2. 护角纸兼容性强（无C边，牛皮纸，瓦楞纸）。
3. 视觉检测包护角的完整性(可选配)。
4. 可实现单托组件奇偶数包角，与MES交互日志可查询组件
传入包角设备进行自动定位。
5. 方便放置护角物料，物料存放高度至少大于500mm。
6. 四个气缸折护角模块同时动作，在流水线中完成电池串装
框组件的归正、自动包护角工作。
1.Easy to operate version switching.
2.Strong compatibility of corner protection paper (No C side,
kraft paper, corrugated paper).
3.Visual inspection of the quality of the corner protection
integrity(optional).
4. Achieve odd and even packet angles for single tray
panel, and interact with MES logs to query panel Incoming
packet angle device for automatic positioning.
5. Convenient placement of corner protection materials, with
a storage height of at least 500mm.
6. Four cylinder folding corner protection modules operate
simultaneously to complete the alignment of the battery
string frame panel, and automatic corner profection inserting.
63 www.horadgroup.com
www.horadgroup.cn 64
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L:1640-2650mm，W:985-1500mm
节拍 Cycle Time ≤16s
外形尺寸 Overall Dimensions (L*W*H) 4000*2050*1800mm
电源 Voltage AC 380V3相5线制 50Hz DC 24V 3-phase 5-wire
功率 Power 12kW
气源 Air Pressure 0.6~0.8MPa
重量 Weight 2500kg
边框高度 Frame Height 25~45mm
护角材质 Corner Protection Material 牛皮纸，瓦楞纸 Kraft paper, corrugated paper
护角厚度 Corner Protection Thickness ≤0.1~2mm
护角盒存放数量
Storage Quantity of Corner Protection Boxes Height: 500mm
上料时间 Loading Time ≤3min
组件定位精度 Panel Positioning Accuracy ≤±0.5mm
4.28 自动分档机
Auto Sorting
技术性能 Technical Performance
1. 适用于目前所有主流组件及装箱方式。
2. 设备可满足组件平放，长边竖插，短边竖插三种模式。
3. 设备整机具备安全防护网，安全可靠，操作简单、灵活。
4. 结构牢固，性能稳定。
5.托位功率显示，自由分档（可选配）。
1.Applicable to all mainstream panels and packaging methods
on the market.
2.Compatible with flat sorting,long-side vertical sorting and
short-side vertical sorting.
3.The entire equipment is equipped with a safety net, which
is safe and reliable, easy and flexible to operate.
4.Firm structure, stable performance.
5.Power display for supporting position, free shifting (optional).
65 www.horadgroup.com
www.horadgroup.cn 66
产品参数 Specification
项目 Item 参数 Parameter
适用组件尺寸 Panel Size L:2500-1650mm，W:980-1400mm
节拍 Cycle Time ≤16s（可根据要求定制）Customizable according to requirements
外形尺寸 Overall Dimensions (L*W*H) 27000*4200*4900mm
电源 Voltage AC 380V 3相5线制3Phase 5 wire 50Hz DC 24V
功率 Power 30kW
气源 Air Pressure 0.6~0.8MPa
重量 Weight 5t
耗气率 Air Consumption Rate 0.4-0.6Mpa, 一个接入点 One drop, 600L/min
升降方向行程范围 Lift Direction Travel Range 0-1900mm
纵向方向行程范围 Longitudinal Travel Range 0-1300mm
稼动率 Utilization Rate 95%
2745六层三腔层压机
2745 Six Layer Three Chamber Laminator
技术性能 Technical Performance
1. 节能省电：通过AI精准温控，升温更加准确，在一定程度
上控制温度的超调。
2. 节省占地：占地面积方面是传统层压机的35%-60%，有
效减少使用空间。
3. 升降系统：层压腔体升降采用伺服液压系统，每层加热平
台之间利用导向进行连接，利用液压缸控制加热平台的升降
从而进行层压。
4. 控制系统：每个层压平台独立加热及真空控制系统，加热
系统温度及电流联合监控，各层出现故障时，可进行屏蔽，
避免影响其他部分工作，安全可靠性高。
5. 加热系统：多层层压机相邻的上、下层都有加热器，可以
实现组件的上、下面同时被加热，提高了能量的利用率，有
利于提高产能，降低设备的能量能耗。
6. 操作便捷简单，设备运行稳定可靠，节能清洁环保，高配
置成平率高。
1.Energy saving and power saving: Through AI precise temperature
control, the temperature rise is more accurate and the temperature
overshoot is controlled to a certain extent.
2.Land saving: 35%-60% of traditional laminators in terms of floor
space, effectively reducing the use of space.
3.Lifting system: The lamination cavity adopts a servo hydraulic system
for lifting, and the heating platforms of each layer are connected by
guides, and hydraulic cylinders are used to control the lifting of the
heating platforms to carry out lamination.
4.Control system: independent heating and vacuum control system
for each lamination platform, joint monitoring of heating system
temperature and current, shielding when each layer fails to avoid
affecting the work of other parts, high safety and reliability.
5.Heating system: There are heaters on the adjacent upper and lower
layers of the multi-layer laminator, which can realize the heating of
the upper and lower parts of the panel at the same time, which
improves the utilization rate of energy, is conducive to increasing
production capacity and reducing energy consumption of equipment.
6.Convenient and simple operation, stable and reliable equipment
operation, energy-saving, clean and environmentally friendly, high
configuration and high leveling rate.
67 www.horadgroup.com
产品参数 Specification
www.horadgroup.cn 68
项目 Item 参数 Parameter
适用组件尺寸 Panel Size
平均工作功率 Average Working Power 175kW
外形尺寸 Overall Dimensions (L*W*H) 27000*3800*3600mm
电源 Voltage 380V±10％ 50HZ 三相五线 3-phase 5-wire
功率 Power 850kW
气源 Air Pressure 0.6-0.8MPa
耗气量 Air Consumption 120L/min
重量 Weight 180t
温度均匀性 Temperature Uniformity ±1.5℃
158/166/182/210版型的通用尺寸组件
Universal size panel for 158/166/182/210
传输精度 Transmission Accuracy ±3mm
工作噪音 Working Noise ≤80dB
作业温度 Working Temperature 室温 RT-180℃
层压腔高度 Laminated Cavity Height 30mm
温控方式 Temperature Control Method 电加热PID Electric heating PID
27115 双层三腔层压机
27115 Double Layer Three Chamber Laminator
技术性能 Technical Performance
1. 节能省电:通过AI精准温控，升温更加准确，在一定程度上
控制温度的超调。
2. 上腔更高温度:采用宏成达自研加热模块，上腔同步实现加
热，最高可达180℃，控温精度高，腔体不易变形。
3. 保温层:采用进口复合材料硅酸铝盐棉作为保温层，有效的
减少热量损失。
4. 控制系统:应用最新工业4.0，让层压机关键数据实时汇总，
上报分析，HMI系统软件操作简便化，更易操作。
5. 特点:兼容性强、性价比高、人工成本低、节省空间、独立
运行、智能化程度高。
6. 操作便捷简单，设备运行稳定可靠，节能清洁环保，高配
置成平率高。
1.Energy saving and power saving: Through AI precise
temperature control, the temperature rise is more
accurate and the temperature overshoot is controlled
to a certain extent.
2.Higher temperature in the upper chamber: Using
Horad's self-researched heating module, the upper
chamber is heated simultaneously, up to 180℃, with
high temperature control precision and the chamber
is not easily deformed.
3.Insulation layer: Imported composite material aluminum
silicate salt cotton is used as the insulation layer to
effectively reduce heat loss.
4.Control system: Apply the latest industry 4.0, so that
the laminator key data real-time summary, reporting
and analysis, HMI system software operation simplifi
cation, more easy to operate.
5.Double layer laminator features: strong compatibility,
high cost performance, low labor cost, space saving,
independent operation, high intelligence.
6.Convenient and simple operation, stable and reliable
equipment operation, energy-saving, clean and
environmental protection, high configuration into a
high flat rate.
69 www.horadgroup.com
产品参数 Specification
www.horadgroup.cn 70
项目 Item 参数 Parameter
适用组件尺寸 Panel Size
温度精度 Temperature Accuracy ±1℃
外形尺寸 Overall Dimensions (L*W*H) 61820*3800*3600mm
电源 Voltage 380V±10％ 50HZ 三相五线 3-phase 5-wire
功率 Power 860kW
气源 Air Pressure 0.6-0.8MPa
耗气量 Air Consumption 6000L/min
重量 Weight 210t
温度均匀性 Temperature Uniformity ±1.5℃
158/166/182/210版型的通用尺寸组件
Universal size panel for 158/166/182/210
传输精度 Transmission Accuracy ±3mm
工作噪音 Working Noise ≤80dB
作业温度 Working Temperature 室温 RT-180℃
层压腔高度 Laminated Cavity Height 30mm
温控方式 Temperature Control Method 电加热PID Electric heating PID
27115 双层双腔层压机
27115 Double Layer Double Chamber Laminator
技术性能 Technical Performance
1. 节能省电:通过AI精准温控，升温更加准确，在一定程度上
控制温度的超调。
2. 上腔更高温度:采用宏成达自研加热模块，上腔同步实现加
热，最高可达180℃，控温精度高，腔体不易变形。
3. 保温层:采用进口复合材料硅酸铝盐棉作为保温层，有效的
减少热量损失。
4. 控制系统:应用最新工业4.0，让层压机关键数据实时汇总，
上报分析，HMI系统软件操作简便化，更易操作。
5. 特点:兼容性强、性价比高、人工成本低、节省空间、独立
运行、智能化程度高。
6. 操作便捷简单，设备运行稳定可靠，节能清洁环保，高配
置成平率高。
1.Energy saving and power saving: Through AI precise
temperature control, the temperature rise is more
accurate and the temperature overshoot is controlled
to a certain extent.
2.Higher temperature in the upper chamber: Using
Horad's self-researched heating module, the upper
chamber is heated simultaneously, up to 180℃, with
high temperature control precision and the chamber
is not easily deformed.
3.Insulation layer: Imported composite material aluminum
silicate salt cotton is used as the insulation layer to
effectively reduce heat loss.
4.Control system: Apply the latest industry 4.0, so that
the laminator key data real-time summary, reporting
and analysis, HMI system software operation simplifi
cation, more easy to operate.
5.Double layer laminator features: strong compatibility,
high cost performance, low labor cost, space saving,
independent operation, high intelligence.
6.Convenient and simple operation, stable and reliable
equipment operation, energy-saving, clean and
environmental protection, high configuration into a
high flat rate.
71 www.horadgroup.com
产品参数 Specification
www.horadgroup.cn 72
项目 Item 参数 Parameter
适用组件尺寸 Panel Size
温度精度 Temperature Accuracy ±1℃
外形尺寸 Overall Dimensions (L*W*H) 49000*3800*3600mm
电源 Voltage 380V±10％ 50HZ 三相五线 3-phase 5-Wire
功率 Power 850kW
气源 Air Pressure 0.6-0.8MPa
耗气量 Air Consumption 4000L/min
重量 Weight 170T
温度均匀性 Temperature Uniformity ±1.5℃
158/166/182/210版型的通用尺寸组件
Universal size panel for 158/166/182/210
传输精度 Transmission Accuracy ±3mm
工作噪音 Working Noise ≤80dB
作业温度 Working Temperature 室温 RT-180℃
层压腔高度 Laminated Cavity Height 30mm
温控方式 Temperature Control Method 电加热PID Electric heating PID
2787双层双腔层压机
2787Double Layer Double Chamber Laminator
技术性能 Technical Performance
1. 加热设计:自身温度均匀性能够达到±1.5℃，绝缘耐压，使
用安全度高，使用寿命长。
2. 采用穿孔加热板:独特的油路设计，控温精度高，温度均匀
性好。加热站的温度、压力、油量等安全措施，是独立于PLC
的一套安全控制措施，即使是在系统死机或PLC故障的情况
下，安全措施依然有效。
3. 导热设计:加热油箱内的加热管将导热油（SD340）加热，
在加热过程中油泵不断将热油从加热油箱中抽吸到加热油路
中，将工作面加热。
4. 真空设计:真空系统采用依波罗阀组结构，阀组与真空泵连
接，通过操作面板可控制依波罗阀门的开启与关闭，实现上
室和下室的抽真空动作。
5. 温控设计:通过铂电阻测得的实际温度，进行PID运算通过
比例、积分、微分的方式输出加热信号，保证台面温度均匀
度在±1.5℃范围之。
6. 特点:兼容性强、性价比高、人工成本低、节省空间、独立
运行、智能化程度高。
1.Heating design: its own temperature uniformity can reach ±1.5℃,
insulation and voltage resistance, high safety and long service life.
2.Adopting perforated heating plate: unique oil circuit design, high
precision of temperature control and good temperature uniformity.
The safety measures of temperature, pressure and oil quantity of the
heating station are a set of safety control measures independent of
PLC, and the safety measures are still effective even in the case of
system death or PLC failure.
3.Heat-conducting design: the heating tube in the heating oil tank
heats the heat-conducting oil (SD340), and during the heating process
the oil pump continuously draws the hot oil from the heating oil tank
into the heating oil circuit to heat the working surface.
4. Vacuum design: The vacuum system adopts the Eboro valve group
structure, which is connected to the vacuum pump. The opening and
closing of the Eboro valve can be controlled through the operation
panel, achieving the vacuum pumping action of the upper and lower
chambers.
5.Temperature control design: The actual temperature measured by
a platinum resistor is used for PID calculation to output the heating
signal through proportional, integral, and differential methods, ensuring
that the temperature uniformity of the tabletop is within the range
of ± 1.5 ℃.
6.Features of double-layer laminator: strong compatibility, high cost
performance, low labor cost, space saving, independent operation,
and high degree of intelligence.
73 www.horadgroup.com
产品参数 Specification
www.horadgroup.cn 74
项目 Item 参数 Parameter
适用组件尺寸 Panel Size
温度精度 Temperature Accuracy ±1℃
外形尺寸 Overall Dimensions (L*W*H) 37500*3800*3600mm
电源 Voltage 380V±10％ 50HZ 三相五线 3-phase 5-wire
功率 Power 400kW
气源 Air Pressure 0.6-0.8MPa
耗气量 Air Consumption 2400L/min
重量 Weight 120t
温度均匀性 Temperature Uniformity ±1.5℃
158/166/182/210版型的通用尺寸组件
Universal size panel for 158/166/182/210
传输精度 Transmission Accuracy ±3mm
工作噪音 Working Noise ≤80dB
作业温度 Working Temperature 室温 RT-180℃
层压腔高度 Laminated Cavity Height 30mm
温控方式 Temperature Control Method 油加热 Oil Heating
