GENERAL INDUSTRIAL ADHESIVE

PRODUCTS SELECTION GUIDE

www.shkdchem.com 0２

CATALOGUE

03 Kangda new materials

04 Development history

05 Acrylic AB adhesive

09 High toughness epoxy adhesive

11 High strength epoxy adhesive

13 Transparent epoxy adhesive

14 One component epoxy adhesive

15 Metal repair putty

17 Threadlocker (anaerobic adhesive）

19 Retaining adhesive (anaerobic adhesive)

20 Pipe thread sealant (anaerobic adhesive)

21 Flange sealant (anaerobic adhesive)

21 Structural adhesive (anaerobic adhesive)

22 Flange sealant (organic silicone)

23 Gasket sealant (organic silicone)

24 Electronic sealant (organic silicone)

03-15 17-24

康达新材

01

25 Adhesive sealant (organic silicone)

27 Thermal grease

28 MS adhesive

29 UV light curing adhesive

(structural adhesive)

30 UV light curing adhesive

(three antiadhesive)

31 Two-component

polyurethane adhesive

32 Polyurethane adhesive

two component potting adhesive

33 Polyurethane adhesiveone component adhesive sealant

34 PUR adhesive

35 Structural adhesive

(hot vulcanized adhesive)

36 Structural adhesive for

quick rubber repair agent

37 Structural adhesive for

conveyor belt adhesive

38

Surface treatment agent

41

Instant adhesive

45

Solvent adhesive

25-33 34-45

康达新材

02

★ National postdoctoral research station

★ The state specializes in special new \"little giant\"

enterprises

★ National enterprise technical center

★ National torch plan key high-tech enterprises

★ Shanghai adhesive engineering technology center

★ The first batch of innovative enterprises in shanghai

康达新材

03

Kangda new materials

Started in 1988, it was listed on the shenzhen stock

exchange in april 2012, and is a listed company on the

main board of the shenzhen stock exchange. One of the

leading companies in china's adhesive industry focusing

on r&d, production and sales of middle and high-end

adhesive products.

Technological innovation has always been the first core

competitiveness, with a number of leading, competitive

adhesive production technology, including wind power

blade with epoxy adhesive, acrylic adhesive, polyurethane adhesive and other series of product performance

has reached the international level of similar products.

The expansion of the merger layout diversified development pattern, into the field of electronic science and

technology materials.

In the future, we will vigorously develop new functional

polymer materials, based on adhesives and supported

by special resins. Combined with their own resources

and advantages to electronic information materials

(such as fluorinated polyimide series, high-purity hydrofluoric acid, semiconductor target, ito special ceramics,

photoresist series, special gases), high-performance

composite materials (such as polyimide, ceramic fiber,

glass fiber, carbon fiber, epoxy resin, polyurethane) and

other directions of in-depth development transformation, improve the strategic layout of the electronic field,

create a \"new materials + electronic technology\" listed

company platform, strive to be a leader in the subdivision field, strive for the hidden champion, through the

production base in shanghai, chengdu, beijing, tangshan, fujian and other places, gradually build high-end,

information, integrated polymer chemical new materials

and electronic science and technology industrial park.

In 2008

Wind leaf glue passed gl certification

In 2018

Bikong technology successfully

restructured into electronic technology

In 2015

Fengxian production base was

fully put into operation

In 1988

Shanghai kangda chemical

experimental factory was established

In 2022

Xi'an caijing light was successfully acquired

In 2019

The controlling shareholder was changed

to tangshan financial holding industry development group

In 2016

The private offering

successfully raised 850 million yuan

In 2012

It was successfully listed on the small and

medium-sized board of shenzhen stock exchange

In 2012

Shanghai kangda chemical

technology research institute was established

In 2023

Successfully acquired shanghai crystal

30

康达新材

04

Development history

After more than years of integration

collaboration, innovation and surpassing,

we have been working hard

康达新材

05

Acrylic AB adhesive

Motor adhesive (WD1004)

Product characteristics

Fast curing, slightly oil surface can also be

bonded, glue line is elastic, impact-resistant

Product application

Suitable for the bonding and assembly of automobile, motorcycle and all kinds of motor magnetic

tile and flywheel, rotor, splint and other accessories

Motor adhesive (WD1004-1)

Product characteristics

Fast curing, slightly oil surface can also be

bonded, glue line is elastic, impact-resistant

Product application

Suitable for the bonding and assembly of automobile, motorcycle and all kinds of motor magnetic

tile and flywheel, rotor, splint and other accessories

Adhesive for elevator (WD1001-3)

Product characteristics

Excellent bonding properties, fast curing

Product application

Suitable for the bonding of stainless steel plate

and galvanized plate, mainly used for the bonding

between elevator stainless steel and stiffener,

front pedal and other components

Metal door adhesive (WD1044)

Product characteristics

Middle curing speed(suitable for large area bonding), high shear strength, good toughness, high

peeling strength

Product application

Bonding between metal door plates and stiffeners

High performance acrylic structural adhesive (WD1001)

Product characteristics

Various materials can be bonded,fast curing , high

bonding strength

Product application

General adhesive, suitable for daily supplies

repair, auto parts repair, outdoor nameplate bonding, production site and field emergency repair and

plugging

High performance acrylic structural adhesive (WD1018)

Product characteristics

Excellent bonding properties, fast curing，low

temperature resistant，good toughness, high

peeling strength

Product application

Suitable for bonding between stainless steel plate

and galvanized plate, and bonding between stainless steel plate and snowflake galvanized plate

康达新材

06

Technical specification

WD1001

WD1001-3

WD1004

WD1004-1

WD1018

WD1044

WD1222

WD1226

Product model

≥20

≥20

≥20

≥20

≥20

≥20

≥20

≥20

Shear strength

(MPa)

≤8

≤15

≤15

≤15

≤15

≤15

≤10

≤15

Initial curing time

(min)

A: 4000 ～ 6000

B: 8000 ～ 10000

A: 5000 ～ 8000

B: 8000 ～ 15000

A: 4500 ～ 6000

B: 4500 ～ 6000

A: 4500 ～ 6000

B: 4500 ～ 6000

A: 4000 ～ 7000

B: 4000 ～ 7000

A: 5000 ～ 8000

B: 8000 ～ 15000

A: thixotropy

B: thixotropy

A: 5000 ～ 8000

B: 8000 ～ 15000

Viscosity

(mPa·s)

1:1 (weight)

1:1 (weight)

1:1 (weight)

1:1 (weight)

1:1 (weight)

1:1 (weight)

1:1 (volume)

1:1 (volume)

Ratio

A: uniform blue colloid

B: uniform red colloid

A: uniform blue colloid

B: uniform red colloid

A: uniform blue colloid

B: uniform red colloid

A: uniform green colloid

B: uniform red colloid

A: uniform blue colloid

B: uniform red colloid

A: uniform blue colloid

B: uniform red colloid

A: blue paste liquid

B: blue paste liquid

A: blue viscous liquid

B: red viscous liquid

Appearance

20g/ per box (200 boxes a box)

80 per box (100 boxes a box)

2kg per box (6 barrels a box)

2kg a barrel (6 barrels a box)

2kg a barrel (6 barrels a box)

2kg a barrel (6 barrels a box)

2kg a barrel (6 barrels a box)

2kg a barrel (6 barrels a box)

50g per double tube

50g per double tube

Packaging

specification

Thixotropic fast positioning adhesive

(WD1222)

Product characteristics

No flow on the vertical face, fast curing, slightly oil

surface can also be bonded, various materials can

be bonded,high bonding strength

Product application

Bonding of most metals, ceramics, rubber, plastics, wood and composite materials.Also used for

field emergency repair and plugging

General super structural adhesive (WD1226)

Product characteristics

Fast curing, oil surface can also be bonded, various

materials can be bonded, high bonding strength

Product application

Bonding of most metals, ceramics, rubber, plastics,

wood and composite materials

康达新材

07

Acrylic structural adhesive (WD1300)

Product characteristics

High strength, high toughness, excellent fatigue

resistance, outstanding impact resistance

Product application

Bonding of plastics, metals and composites

Acrylic structural adhesive (KD1406)

Product characteristics

Quake-proof, high temperature, heat and humidity resistance, high thixotropy

Product application

Structural bonding of stainless steel, aluminum

and galvanized sheet

Acrylic structural adhesive (KD005)

Product characteristics

Fast curing, damp and heat aging resistance, high

streng

Product application

Bonding of plastics, metals and composite

Acrylic structural adhesive (KD007)

Product characteristics

Fast curing, high toughness, high elongation

Product application

Bonding of plastics, metals and rigid link

Acrylic motor structural adhesive

(WD1357)

Product characteristics

Fast curing at room temperature, good high temperature resistance,anti-drop, impact resistance

Product application

Suitable for the bonding and assembly of automobile, motorcycle and all kinds of motor magnetic

tile and flywheel, rotor, splint and other accessories

low odor acrylic structural adhesive

(KD1812)

Product characteristics

Low odor, impact resistance, high shear strength

Product application

Bonding of most metals, ceramics, rubber, plastics, wood and composite materials

low odor acrylic structural adhesive

(KD1805)

Product characteristics

Low odor, high toughness, high strength

Product application

Structural bonding of plastic and metal parts

low odor acrylic structural adhesive

(KD1816)

Product characteristics

Low odor, high thixotropy,impact resistance, high

shear strength, high peeling strength

Product application

Bonding of most metals, ceramics, rubber, plastics, wood and composite materials

Acrylic AB adhesive

康达新材

08

WD1300

WD1357

KD005

KD007

KD1406

KD1805

KD1812

KD1816

Technical specification

Product model

≥16

≥20

≥20

≥20

≥16

≥18

≥20

≥20

Shear strength (MPa)

≤30

≤10

≤10

≤10

≤18

≤10

≤15

≤15

Initial curing time (min)

A: 15000 ～ 50000

B: 15000 ～ 50000

A: 5000 ～ 15000

B: 5000 ～ 15000

A: 90000 ～ 130000

B: 50000 ～ 90000

A: 15000 ～ 35000

B: 50000 ～ 90000

A: 35000 ～ 60000

B: 50000 ～ 90000

A: 80000 ～ 120000

B: 40000 ～ 90000

A: 8000 ～ 15000

B: 7000 ～ 14000

A: 70000 ～ 150000

B: 70000 ～ 150000

Viscosity

(mPa·s)

1:1 (volume)

1:1 (weight)

10:1 (volume)

10:1 (volume)

4:1 (volume)

10:1 (volume)

1:1 (weight)

1:1 (weight)

Ratio

A: uniform blue colloid

B: uniform red colloid

A: yellow paste

B: blue paste

A: amber liquid

B: blue paste

A: gray paste

B: black paste

A: beige paste

B: blue paste

A: light yellow liquid

B: purple liquid

A: beige paste

B: purple paste

Appearance

A: beige paste

B: beige paste

Packaging

specification

50ml/ double tube

400ml/ double tube

18kg/ barrel

50 ml / double tube

490 ml / double tube

18kg/ barrel

50 ml / double tube

490 ml / double tube

18kg/ barrel

50 ml / double tube

490 ml / double tube

18kg/ barrel

50 ml / double tube

400 ml / double tube

18kg/ barrel

50 ml / double tube

400 ml / double tube

18kg/ barrel

375ml/ double tube

18kg/ barrel

2kg/ barrel

(6 barrels a box)

康达新材

09

Epoxy structural adhesive (WD3068)

Product characteristics

Good toughness, excellent adhesion and aging

resistance

Product application

The composite bonding of aluminum plate and

polyurethane foam, aluminum plate and wood,

aluminum plate and aluminum honeycomb, aluminum plate and steel and iron (buried iron)

Epoxy structural adhesive (WD3368G)

Product characteristics

Good toughness,high aluminum peeling strength,

good anti-sagging,excellent adhesion and aging

resistance

Product application

The composite bonding of aluminum plate and

polyurethane foam, aluminum plate and wood,

aluminum plate and aluminum honeycomb, aluminum plate and steel and iron (buried iron)

Epoxy structural adhesive (WD3381)

Product characteristics

High aluminum peeling strength, excellent adhesion and aging resistance

Product application

The composite bonding of aluminum plate and

polyurethane foam, aluminum plate and wood,

aluminum plate and aluminum honeycomb, aluminum plate and steel and iron (buried iron)

Epoxy structural adhesive (WD3706)

Product characteristics

High peeling strength, excellent adhesion and

aging resistance

Product application

Bonding of honeycomb composite panels

Guide rail adhesive (WD3642)

Product characteristics

High aluminum peeling strength, good toughness,

excellent adhesion and aging resistance

Product application

The composite bonding of aluminum plate and

polyurethane foam, aluminum plate and wood,

aluminum plate and aluminum honeycomb, aluminum plate and steel and iron (buried iron) etc

Epoxy structural adhesive (WD3069)

Product characteristics

High aluminum peeling strength,high strength,

good toughness, excellent adhesion and aging

resistance

Product application

The composite bonding of aluminum plate and

polyurethane foam, aluminum plate and wood,

aluminum plate and aluminum honeycomb, aluminum plate and steel and iron and aluminum sheet

and composite material

High toughness epoxy adhesive

康达新材

10

Technical specification

WD3068

WD3069

WD3368G

WD3381

WD3642

WD3705

WD3706

WD3760

WD3791

Product model

≥15

≥20

≥20

≥20

≥20

≥20

≥12(AL/AL)

≥20

≥12(AL/AL)

Shear strength

(MPa)

≥22

≥35

≥35

≥35

≥40

≥20

≥30

≥15

≥40

90°peeling strength

（N/cm）

-40 ～ 100

-50 ～ 120

-50 ～ 120

-50 ～ 120

-50 ～ 120

-50 ～ 120

-50 ～ 120

-50 ～ 120

-40 ～ 100

Working

temperature （℃）

1:1 (weight)

1:1 (weight)

1:1 (weight)

5:1 (weight)

1:1 (weight)

100:43 (weight)

3:2 (weight)

2:1 (volume)

1:1 (volume)

Appearance Ratio

A: uniform white colloid

B: uniform black colloid

A: uniform white/beige

colloid

B: uniform beige colloid

A: uniform white/beige

colloid

B: uniform beige colloid

A: uniform white liquid

B: uniform light yellow

liquid

A: uniform white liquid

B: uniform brown liquid

A: uniform blue colloid

B:uniform tan colloid

A: uniform milk white

colloid

B: uniform tan colloid

A: uniform white liquid

B: uniform tan colloid

A: uniform beige/light

yellow colloid

B: uniform brown colloid

Epoxy structural adhesive (WD3705)

Product characteristics

High aluminum peeling strength, excellent adhesion and aging resistance

Product application

Bonding of all kinds of metal, plastic, fiberglass,

porcelain, wood and other materials.The composite bonding of aluminum plate and polyurethane

foam, aluminum plate and wood, aluminum plate

and aluminum honeycomb, aluminum plate and

steel and iron

Epoxy structural adhesive (WD3760)

Product characteristics

Fast curing, high thixotropy (can be worked on

vertical surface ), high strength, can be cured at

humid environment

Product application

Bonding of all kinds of metal, ceramic, smc, nylon,

wood and other materials

Fast curing flexible epoxy adhesive

(WD3791)

Product characteristics

High bonding strength, 30 minutes operating time,

good toughness, high elongation

Product application

Flexible bonding of all kinds of metal, plastic,

fiberglass, porcelain, wood and other materials

Room temperature

3h/72h 70℃ 45min

1.5h/72h

2h/72h

3h/72h

4h/24h

2h/72h

2h/72h

Curing time

Initial curign/fully curing

Room temperature

3h/72h 70℃ 45min

Room temperature

3h/24h 60℃ 45min

Packaging

specification

A: 10kg/ barrel

B: 10kg/ barrel

A: 10kg/ barrel

B: 10kg/ barrel

A: 4kg/ barrel

B: 4kg/ barrel

A: 10kg/ barrel

B: 2kg/ barrel

A: 1kg/ barrel

B: 1kg/ barrel

A: 15kg/ barrel

B: 15kg/ barrel

A: 50g/ double tube

A: 50g/ double tube

A: 1.43kg/ set

B: 28.6kg/ set

康达新材

11

Epoxy structural adhesive (WD3005)

Product characteristics

Low odor, good sagging,excellent adhesion and

aging resistance

Product application

Composite bonding of ceramic sheet with ceramic

sheet, ceramic sheet with steel, steel with

cement concrete and other materials

Epoxy structural adhesive (WD3106)

Product characteristics

Good toughness,good anti-sagging,excellent

adhesion and aging resistance

Product application

Bonding of all kinds of metal, plastic, fiberglass,

porcelain, wood and other materials bonding

Epoxy structural adhesive (WD3609)

Product characteristics

Long operating time, excellent adhesion and

aging resistance

Product application

Bonding of all kinds of metal, plastic, fiberglass,

porcelain,cement concrete, wood and other materials bonding

Backing adhesive (WD3007)

Product characteristics

Low viscosity, good fluidity, good impact resistance, excellent adhesion and aging resistance

Product application

The brace protects the metal resistant lining plate

and the equipment body of the mill and crusher

from damage

Adhesive for composite materials

(WD3010)

Product characteristics

High thixotrotic, no sagging, moderate operation

time, excellent adhesion and aging resistance

Product application

Composite bonding of metal (steel, aluminum, etc.)

and composite material (epoxy glass fiber reinforced plastic)

High temperature resistance structural

adhesive (WD3035G)

Product characteristics

Good temperature resistance,no sagging, excellent adhesion and aging resistance

Product application

The composite bonding of ceramic sheet and

ceramic sheet, ceramic sheet and steel, steel and

composite material, steel and steel and other materials

Acid and alkali resistant structural adhesive (WD3037)

Product characteristics

Good acid and alkali resistance, good current

resistance, excellent adhesion and aging resistance

Product application

Composite bonding of ceramic sheet with ceramic

sheet, ceramic sheet with steel, steel with cement

concrete and other materials

High thixotropic structural adhesive

(WD3032)

Product characteristics

Easy to mix, good anti-sagging,excellent adhesion

and aging resistance

Product application

Applied to the composite bonding of ceramic and

ceramic, ceramic and steel, steel and cement concrete and other materials

High toughness epoxy adhesive

康达新材

12

Technical specification

WD3005

WD3007

WD3010

WD3032

WD3035G

WD3037

WD3106

WD3609

WD3790

KD3020

KD3060

KD3120

≥20

≥20

≥25

≥18（FRP/FRP）

≥22

≥22

≥3.0（200℃）

≥22

≥18

≥20

≥20

≥25(AL/AL)

≥25(AL/AL)

≥25(AL/AL)

Shear strength (MPa)

1.5h/72h

1.5h/72h

2h/72h

2.5h/72h

2.5h/72h

1.5h/72h

2h/72h

3.5h/72h

1h/72h

40min/72h

2h/72h

2.5h/72h

Curing time

Initial curign/fully curing

-40 ～ 100

-40 ～ 100

-50 ～ 120

-50 ～ 160

-50 ～ 200

-40 ～ 100

-40 ～ 100

-50 ～ 120

-40 ～ 100

-40 ～ 100

-40 ～ 100

-40 ～ 100

Working

temperature (℃)

4:1 (weight)

9:1 (weight)

2:1 (weight)

2:1 (weight)

2:1 (weight)

3:1 (weight)

5:1 (weight)

1:1 (weight)

2:1 (weight)

2:1 (volume)

2:1（volume)

2:1 (volume)

Product model Appearance Ratio Packaging

A: 4kg/ barrel

B: 1kg/ barrel

A: 4kg/ barrel

B: 4kg/ barrel

A: 9kg/ barrel

B: 1kg/ barrel

A: 20kg/ barrel

B: 20kg/ barrel

A: 10kg/ barrel

B: 5kg/ barrel

A: 10kg/ barrel

B: 2kg/ barrel

A: 5kg/ barrel

B: 5kg/ barrel

A: 20kg/ barrel

B: 10kg/ barrel

A: 20kg/ barrel

B: 10kg/ barrel

50ml/

double barrel

50ml/

double barrel

50ml/

double barrel

A: uniform white/beige colloid

B: uniform white/beige colloid

A: uniform white/beige colloid

B: uniform beige colloid

A: uniform white/beige colloid

B: uniform light brown colloid

A: water clear colloid

B: water clear /light yellow

colloid

A: white viscous liquid

B: light yellow viscous liquid

A: white viscous liquid

B: light yellow viscous liquid

A: white viscous liquid

B: light yellow viscous liquid

A: uniform white/beige colloid

B: uniform yellow /light yellow

colloid

A: uniform off white/light gray

colloid

B: uniform light gray/blue colloid

A: uniform beige / off white colloid

B: uniform beige / light yellow

colloid

A: uniform yellow /light

yellow colloid

B: uniform light red colloid

A: uniform light red colloid

B: uniform brown colloid

Epoxy adhesive (WD3790)

Product characteristics

Low viscosity, high bonding strength, good toughness

Product application

Bonding of all kinds of metal, plastic, fiberglass,

porcelain, wood and other materials bonding

Epoxy adhesive (WD3060)

Product characteristics

Medium curing speed, excellent bonding properties, chemical and solvent resistance, excellent

electrical insulation property

Product application

General industry, construction industry.It has

excellent bonding properties for most plastics

and metals

Epoxy structural adhesive (WD3120)

Product characteristics

Excellent bonding property,good chemical and

solvent resistance, excellent electrical insulation

property

Product application

General industry, construction industry.It has

excellent bonding properties for most plastics

and metals

Epoxy structural adhesive (WD3020)

Product characteristics

Fast curing, high peeling and shear strength, good

chemical and solvent resistance, excellent electrical insulation property

Product application

General industry, construction industry.It has

excellent bonding properties for most plastics and

metals

康达新材

13

Technical specification

WD3039

WD3205

WD3605

WD3620

KD3033

Product model

≥18

≥12

≥15

≥15

≥20(AL/AL)

Shear strength (MPa)

1.5h/72h

5min/12h

5min/24h

2h/24h

2.5h/24h

Curing time

Initial curing/fully curing

-40 ～ 100

-40 ～ 120

-40 ～ 100

-50 ～ 120

-40 ～ 100

Operating time （℃）

2:1 (weight)

1:1 (weight)

1:1 (weight)

1:1 (weight)

2:1 (volume)

Appearance Ratio

Transparent epoxy adhesive

Low viscosity epoxy adhesive (WD3039)

Product characteristics

Low viscosity, fast curing speed, certain transparency, excellent adhesion and ageing resistance

Product application

Used for potting or ceramic chip industry

Super structural adhesive (WD3620)

Product characteristics

Good transparency, excellent adhesion and ageing

resistance

Product application

Used for optical instruments, instruments, crafts,

machining, electronics, automotive textiles, family

daily bonding and maintenance fields

Epoxy adhesive (KD3033)

Product characteristics

Low shrinkage, impact resistance, transparency,

excellent optics, excellent structure, machinery

and electrical insulation properties

Product application

Used for bonding, small parts filling, dispensing

and laminating and so on

5 minutes fast curing transparent epoxy

structural adhesive (WD3605)

Product characteristics

5 minutes of initial solid, colorless transparent,

super-low odor, various of materials can be

bonded, high bonding strength

Product application

Various of materials can be bonded, good adhesion

to metal, glass, ceramics and other ornaments

Fast curing transparent epoxy structural

adhesive (WD3205)

Product characteristics

Fast positioning and curing,excellent adhesion and

ageing resistance, cured material has good transparency

Product application

Used for optical instruments, instruments, crafts,

machining, electronics, automotive textiles, family

daily bonding and maintenance fields

A: colorless or light yellow

transparent liquid

B: light yellow transparent liquid

A: colorless transparent liquid

B: colorless transparent liquid

Packing

specification

A: 10kg per barrel

B: 10kg per barrel

A: 20kg per set

B: 20kg per set

A: 80kg per box

B: 2kg per set

80g per box

50ml per double

barrel

A: colorless transparent liquid

B: colorless transparent liquid

A: colorless transparent liquid

B: colorless transparent liquid

A: colorless transparent liquid

B: colorless transparent liquid

康达新材

14

Technical specification

WD3117

WD3182

WD3183

WD3184

WD3187

Product model

≥25

≥30

≥35

≥25

≥12

Shear strength (MPa)

/

Roller peel strength

≥60N·cm/cm

90°peel strength

≥6KN/m

Roller peel strength

≥25N·cm/cm

/

Peel strength

120℃×2h

125℃×1.5h

130℃×2h

125℃×1.5h

120℃×4h

Curing condition Packing specification

One component

Epoxy adhesive

Epoxy film (WD3184)

Product characteristics

High bonding strength, good toughness, the glue

layer is not brittle

Product application

Bonding of high speed rail car, car door,floor,

honeycomb and fiberglass composite material

One component epoxy adhesive

(WD3117)

product characteristics

Anti flaming , high bonding strength, good heat

resistance, good thixotropy

Product application

It has good adhesion for metals (stainless steel,

carbon steel, aluminum alloy, copper, etc.) and

ceramics

One component epoxy adhesive(WD3183)

Product characteristics

High bonding strength, good toughness, the glue

layer is not brittle

Product application

Bonding of high speed rail car, car door,floor,

aluminum plate and fiberglass composite material

Medium temperature curing epoxy film

(WD3182)

Product characteristics

High bonding strength, good toughness, the glue

layer is not brittle

Product application

Used in honeycomb curtain wall, large aircraft,

high-speed rail cars, doors, floor honeycomb and

frp composite material bonding, widely used in aviation, high-speed rail and other fields

One component fast curing epoxy adhesive (WD3187)

Product characteristics

High bonding strength, good heat resistance,

thixotropy

Product application

Applied to all kinds of metal, frp composite materials and other materials, with excellent adhesion,

should be used in electronics, electrical appliances and so on

Appearance

Membranous blue

Milky white or beige

viscous liquid

Dark gray paste

Membranous blue

Brown or tawny liquid

330g/ per piece (30

pieces per box )

0.25mm×1000mm×50m

per roll

4kg per barrel

0.2mm×1000mm×50m

per roll

can be customized according

to customer needs.

康达新材

15

Casting repair putty (WD101)

Product characteristics

Cast iron color,high strength

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings

Iron repair putty (WD111)

Product characteristics

Cast iron color,high strength

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings.Repair

and regeneration of all kinds of machinery equipment, parts wear and damage

Aluminum repair putty (WD113)

Product characteristics

Aluminium color,high strength

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings.Repair

and regeneration of all kinds of aluminium machinery equipment, parts wear and damage

Steel repair putty (WD112)

Product characteristics

Steel color, high strength

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings.Repair

and regeneration of all kinds of steel machinery

equipment, parts wear and damage

Metal repair putty

康达新材

16

Technical specification

WD101

WD111

WD112

WD113

WD114

WD118

WD3111

Product

model

≥10

≥10

≥10

≥8

≥8

≥15

≥20

Shear strength

(MPa)

≥10

≥10

≥10

≥8

≥8

≥15

≥50

Tensile strength

（MPa）

80 ～ 90

80 ～ 90

80 ～ 90

80 ～ 90

80 ～ 90

80 ～ 90

85 ～ 90

Hardness

（Shore D）

24

24

24

24

24

24

24

Machined or

used time (h)

20 ～ 40

20 ～ 40

20 ～ 40

20 ～ 40

20 ～ 40

20 ～ 40

20 ～ 40

Operating time

（min）

3.5:1

3.5:1

3.5:1

4.5:1

3.5:1

1:1

3.5:1

Ratio by

volume （A:B）

7:1

7:1

7:1

6:1

6:1

5.5:4.5

7:1

Ratio by quality

（A:B）

Gunk

Gunk

Gunk

Gunk

Gunk

Gunk

Gunk

physical

state

Cast iron color

Cast iron color

Steel color

Aluminum color

Copper color

Cast iron color

Gray

Color

after curing

Super strength industrial repair agent

(WD3111)

Product characteristics

Cast iron color,high strength

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings.Repair

and regeneration of all kinds of machinery equipment, parts wear and damage.

Copper repair putty (WD114)

Product characteristics

Brass, high strength

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings.Repair

and regeneration of all kinds of copper machinery

equipment, parts wear and damage

Casting adhesive (WD118)

Product characteristics

Cast iron color,high strength,easy to use

Product application

Repair of casting defects such as sand holes,

pores or cracks in iron and steel castings

Packing specification

500g per set

(16 sets a box)

500g per set

(16 sets a box)

500g per set

(16 sets a box)

500g per set

(16 sets a box)

250g per set

(16 sets a box)

250g per set

(16 sets a box)

100g per set

(50 sets a box)

康达新材

17

High strength thread locking anaerobic

adhesive (WD5062)

Product characteristics

High strength, thixotropy, good resistance to

chemical media

Product application

Locking and sealing of threads up to m20

Thixotropic thread locking anaerobic adhesive (WD5042)

Product characteristics

Low-medium strength, thixotropy, removable

Product application

Locking and sealing of m6 ～ m20

High strength thread locking anaerobic

adhesive (WD5071)

Product characteristics

High strength, medium viscosity

Product application

Locking and sealing of threads up to m36

High viscosity thread locking anaerobic

adhesive (WD5077)

Product characteristics

High strength, high viscosity, good resistance to

chemical media

Product application

Locking and sealing of threads up to m36

Anaerobic adhesive (WD352)

Product characteristics

High strength, fast curing,general type

Product application

Suitable for locking and sealing of threaded parts

Permeable anaerobic sealant (WD5090)

Product characteristics

Low viscosity, high permeability

Product application

Penetration and sealing of metal welds d casting

sand holes.

Locking and sealing of m2 ～ m12

Threadlocker

(anaerobic adhesive)

康达新材

18

Technical specification

WD352

WD5042

WD5062

WD5071

WD5077

WD5090

WD5320-1

WD5320

Product

model

30min/24h

30min/24h

30min/24h

30min/24h

60min/24h

30min/24h

10min/24h

10min/24h

Curing time

Initial curing/fully curing

≥25

10 ～ 25

≥16

≥18

≥18

2.5 ～ 11.5

≥10

≥10

Breaking torque

（N·m）

≥20

1.5 ～ 7.0

≥10

≥20

≥16

20 ～ 35

/

/

Mean disassembly

torque （N·m）

-55 ～ 150

-55 ～ 150

-55 ～ 150

-55 ～ 150

-55 ～ 150

-55 ～ 150

-55 ～ 150

-55 ～ 150

Operating time

（℃）

Anaerobic adhesive (WD5320-1)

Product characteristics

High strength, high viscosity, fast curing

Product application

Locking and sealing of threaded parts between

metal materials

Anaerobic adhesive (WD5320)

Product characteristics

High strength, thixotropy, fast curing

Product application

Locking and sealing of threaded parts between

metal materials

Packing specification

50ml per piece (80 pieces a box)

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box)

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box)

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box)

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box)

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box)

250ml per piece (40 pieces a box)

250ml per piece (40 pieces a box)

1kg per barrel (12 barrels a box)

250ml per piece (40 pieces a box)

550 ～ 950

1200 ～ 6000

1800 ～ 6000

400 ～ 800

3500 ～ 7000

10 ～ 20

3000 ～ 7000

8000 ～ 14000

Viscosity

（mPa·s)

thixotropy

thixotropy

thixotropy

Color

Blue

Red

Red

Red

Green

Yellow or

light yellow

Colorless or

light yellow

Colorless or

light yellow

康达新材

19

WD5020

WD5050

WD5080

Product model

0.25

0.1

0.2

Maximum filling gap

（mm)

-55 ～ 220

-55 ～ 150

-55 ～ 150

Operating time

（℃）

30min/24h

30min/24h

30min/24h

Curing time

Initial curing

≥20

≥20

≥21

Shear strength

（MPa）

4000 ～ 7000

100 ～ 300

1300 ～ 3000

Viscosity

（mPa·s) Color Packing specification

Chartreuse

Green

Green

Technical specification

High temperature resistance anaerobic

adhesive (WD5020)

Product characteristics

High strength, high temperature resistance,

medium resistance, high viscosity

Product application

The retaining of valve bushing, injection moulding

movement bushing, cylinder bushing,key way etc.

High viscosity holding anaerobic adhesive (WD5080)

Product characteristics

High strength, high viscosity

Product application

The retaining of shaft and sleeve, pulley, gear

General holding anaerobic adhesive

(WD5050)

Product characteristics

High strength, low viscosity,general type

Product application

The retaining of key and shaft, bearing, shaft

sleeve use as transitional, use in fill gaps

Retaining adhesive

(anaerobic adhesive)

50ml per piece (80 pieces a box )

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box )

250ml per piece (40 pieces a box)

50ml per piece (80 pieces a box )

250ml per piece (40 pieces a box)

康达新材

20

Technical specification

554

569

WD5567

Product model

≥50

≥70

≥69

With stand voltage

（MPa）

30min/24h

30min/24h

2h/72h

Curing time

Initial curing/fully curing

-55 ～ 150

-55 ～ 150

-55 ～ 200

Operating temperature （℃）

2500 ～ 3500

300 ～ 500

Around 550000

Viscosity

（mPa·s)

Packing

specification

Pipe thread sealant (554)

Product characteristics

High viscosity, high strength, fast curing speed,-

good resistance to chemical media

Product application

Locking and sealing of threads up to m80

Pipe thread sealant (569)

Product characteristics

Low strength, medium viscosity, fuel oil resistance, hydraulic oil and chemicals resistance

Product application

Hydraulic, pneumatic and fuel piping systems

Anaerobic sealant for pipe threads

(WD5567)

Product characteristics

High viscosity, high temperature resistance, good

medium resistance, easy to disassemble

Product application

Locking and sealing of large diameter metal pipe

thread and threads up to m80

Pipe thread sealant

(anaerobic adhesive)

Color

White or light

yellow

Brown

Red 50ml/ piece

(80piece a box)

50ml/ piece

(80piece a box)

50ml/ piece

(80piece a box)

康达新材

21

Technical specification

WD5015

Product

model

60min/24h

Curing time

Initial curing/fully curing

≥20

With stand voltage （MPa）

-55 ～ 150

Operating

temperature （℃）

0.25

Maximum filling gap （mm)

Packing

specification

Technical specification

WD5319

Product model

≥10

With stand voltage （MPa）

5min/24h

Curing time

Initial curing/fully curing

-55 ～ 120

Operating temperature （℃）

700 ～ 1100

Viscosity

（mPa·s) Color

Bluish violet

Packing

specification

Anaerobic structural adhesive (WD5319)

Product characteristics

Low viscosity, high strength, fast curing

Product application

Bonding of rare earth permanent magnet material

with metal substrate

Flat sealing anaerobic adhesive

(WD5015)

Product characteristics

Thixotropic viscosity,glue layer is elastic after curing,high pressure resistance,good medium resistance

Product application

Suitable for sealing of pump, reducer, gearbox,

automotive and other industries parts

50ml / piece (80 piece a box)

300ml / piece (40 piece a box)

50ml / piece (80 piece a box)

250ml / piece (40 piece a box)

Viscosity

mPa·s)

Pasty thixotropy

Color

bluish violet

Flange sealant

(anaerobic adhesive)

Structural adhesive

(anaerobic adhesive)

康达新材

22

Technical specification

587

596

598

Product

model

≤30

≤30

≤30

Surface drying time

（min）

≥10

≥10

≥10

Maximum

seal pressure(Mpa)

≥1.2

≥1.2

≥1.2

Tensile strength （MPa）

≥200

≥200

≥200

Elongation

at break(%)

-55 ～ 260

-55 ～ 300

-55 ～ 260

Operating

temperature(℃)

6

6

6

Maximum filling

gap(mm)

30 ～ 45

30 ～ 45

30 ～ 45

hardness

（Shore A） Appearance

Blue paste

Grey paste

Black paste

Silicone rubber flang sealant

(587)

Product characteristics

Ageing resistance, neutral acid-base

resistance, high and low temperature

resistance, glue layer is elastic after

curing, impact resistance, high

strength, high extension, excellent

lubricating oil resistance, good bonding

performance

Product application

Suitable for sealing all kinds of mechanical equipment parts

Silicone rubber flang sealant

(596)

Product characteristics

Ageing resistance, neutral acid-base

resistance, high and low temperature

resistance, glue layer is elastic after

curing, impact resistance

Product application

Suitable for sealing all kinds of mechanical equipment parts

Silicone rubber flang sealant

(598)

Product characteristics

Ageing resistance, neutral acid-base

resistance, high and low temperature

resistance, glue layer is elastic after

curing, impact resistance, high

strength, high extension, excellent

lubricating oil resistance, good bonding

performance

Product application

Suitable for sealing all kinds of mechanical equipment parts

Packing

specification

50ml / piece

(20 piece a box)

50ml / piece

(20 piece a box)

50ml / piece

(20 piece a box)

Flange sealant

(organic silicone)

康达新材

23

Technical specification

KD586

WD6587

WD6588

WD6608

Product

model

≤30

≤30

≤30

≤30

Tack free time

(min)

≥10

≥10

≥10

≥10

Maximum seal

pressure(Mpa)

≥1.2

≥1.2

≥1.2

≥1.2

Tensile strength

(MPa)

≥300

≥200

≥200

≥200

elongation

at break (%)

-55 ～ 260

-55 ～ 260

-55 ～ 300

-55 ～ 260

Operating

time (℃)

6

6

6

6

Maximum

filling gap(mm)

30 ～ 45

30 ～ 45

30 ～ 45

30 ～ 45

Hardness

(Shore A)

Silicone gasket sealant

(KD586)

Product characteristics

Good high temperature resistance,

good water and pressure resistance,

good sealing, impact resistance, ageing

resistance, acid-base resistance,high

elongation

Product application

Sealing of mechanical, electronic,

chemical equipment and vehicle

engine, speed box, gear box, axle etc.

Silicone gasket sealant

(KD6587)

Product characteristics

Good high temperature resistance,

good water and pressure resistance,

good sealing, impact resistance, ageing

resistance, acid-base resistance,high

elongation

Product application

Sealing of mechanical, electronic,

chemical equipment and vehicle

engine, speed box, gear box, axle etc

Silicone gasket sealant

(KD6588)

Product characteristics

Good high temperature resistance,

good water and pressure resistance,

good sealing, impact resistance, ageing

resistance, acid-base resistance,high

elongation

Product application

Sealing of mechanical, electronic,

chemical equipment and vehicle

engine, speed box, gear box, axle etc

Silicone gasket sealant

(KD6608)

Product characteristics

Good high temperature resistance,

good water and pressure resistance,

good sealing, impact resistance, ageing

resistance, acid-base resistance,high

elongation

Product application

Sealing of mechanical, electronic,

chemical equipment and vehicle

engine, speed box, gear box, axle etc

Gasket sealant

(organic silicone)

Packaging

specification

55g per piece (100 pieces a box)

85g per piece (80 pieces a box)

55g per piece (100 pieces a box)

85g per piece (80 pieces a box)

55g per piece (100 pieces a box)

85g per piece (80 pieces a box)

55g per piece (100 pieces a box)

85g per piece (80 pieces a box)

Appearance

Black paste

Blue paste

Red paste

Gray paste

康达新材

24

Electronic sealant (WD6703)

Product characteristics

No isocyanate, dealcoholization,low

odor, low viscosity, can flow, high

saturation,aging resistance,

acid-base resistance,high/low temperature resistance, seal a various of

materials

Product application

Bonding and sealing of electronic

components, instruments, air conditioners, refrigerators, freezers and

auto parts

Electronic sealant (WD6705)

Product characteristics

No isocyanate, dealcoholization,low

odor, low viscosity, can flow, high

saturation,aging resistance,

acid-base resistance,high/low temperature resistance, seal a various of

materials

Product application

Electronic components potting, surface coating

Technical specification

WD6703

WD6704

WD6705

Product

model

≥0.5

≥0.5

≥0.15

Tensile strength

（MPa）

≥50

≥50

≥30

Elongation at break

（%）

≤30

≤30

≤30

Tack free time

（min）

-60 ～ 200

-60 ～ 250

-60 ～ 200

Operating time

（℃）

20 ～ 35

20 ～ 35

15 ～ 30

Hardness

(Shore A)

High temperature resistant

electronic Sealant (WD6704)

Product characteristics

High temperature resistance, excellent

bonding properties,good electrical

insulation and arc resistance, aging

resistance, oil resistance, water-proof,

acid-base resistance

Product application

Bonding and sealing of electric heaters, small components, high temperature instruments, and auto parts

Electronic sealant

(organic silicone)

Appearance

White flow

White flow

Transparent flow

Packing specification

45g per piece

(100 pieces a box)

45g per piece

(100 pieces a box)

45g per piece

(100 pieces a box)

康达新材

25

Silicone sealant (WD6002)

Product characteristics

Excellent weather and aging resistance, uv resistance, ozone resistance, and excellent moisture and waterproof ,excellent high and low temperature resistance

Product application

Sealing and bonding of energy-saving

lamp industry,insulation and bonding

sealing for household appliances,

computers and various electronic

components

Silicone sealant (WD6602A)

Product characteristics

Aging resistance, neutral acid and

alkali resistance, high and low temperature resistance, insulation, waterproof

Product application

Sealing and bonding of glass, aluminum, stainless steel, iron, copper,

polycarbonates and other materials

Silicone sealant (WD65005)

Product characteristics

Good electrical performance,quake-proof，

electrical and thermal insulation，

ageing resistance, uv resistance,moisture and waterproof

Product application

Positioning and bonding of electronic

components such as power adapters

Silicone sealant (WD6928)

Product characteristics

Fast curing,good bonding properties

for a variety of materials,good electrical performance,quake-proof，electrical and thermal insulation，ageing

resistance, uv resistance,moisture

and waterproof

Product application

Sealing and bonding of household

appliances such as range hood, integrated stove, electric heating table,

disinfection cabinet, freezer, machinery, automobile and other industrial

fields

Silicone sealant (WD6930)

Product characteristics

Aging resistance, neutral acid and

alkali resistance, high and low temperature resistance, impact resistance，excellent resistance to lubricating oil

Product application

All kinds of mechanical equipment

parts joint surface sealing, glass sealing, glass and support structure

bonding and sealing

Silicone sealant (WD6581)

Product characteristics

Elastic, impact resistance, high

extension, good lubricating oil resistance, good bonding performance

Product application

Bonding and sealing of metal and surface treatment (painted or plated) of

metal, plastic, glass, rubber and other

materials

Two component silicone adhesive (WD6822)

Product characteristics

Fast curing,excellent weather and

aging resistance,uv resistance, ozone

resistance,and excellent moisture

and waterproof

Product application

Sealing and bonding of household

appliances such as range hood, integrated stove,gas stove, dish-washing

machine,disinfection cabinet , water

heater， lamp and water purifier. Sealing and bonding for automotive, photovoltaic and other industrial fields

Two component silicone adhesive (WD6938)

Product characteristics

Two component, mixing ratio 1:1,

fasting curing, excellent weather and

aging resistance, uv resistance,excellent moisture and waterproof

Product application

Sealing and bonding of lighting,kettle,

soybean milk machine,crafts and toys

and other industries.

Adhesive sealant

(organic silicone)

康达新材

26

Technical specification

WD6002

WD6005

WD6928

WD6581

WD6602A

WD6930

WD6822

WD6938

Product model

≥1

≥1.5

≥1.5

≥1.0

≥2.5

≥1.5

≥1.5

≥0.5

Tensiletsrength

（MPa）

≥300

≥50

≥100

≥100

≥250

≥250

≥150

≥150

Breaking

elongation (%)

≤15

≤10

≤30

≤30

≤30

≤30

≤15

≤30

Tack free time

（min）

-60 ～ 200

-60 ～ 200

-60 ～ 250

-55 ～ 260

-60 ～ 200

-60 ～ 200

-60 ～ 200

-60 ～ 200

Operating time

（℃）

25 ～ 35

65 ～ 75

40 ～ 50

25 ～ 40

40 ～ 60

30 ～ 45

35 ～ 45

20 ～ 30

Hardness

（Shore A）

Packing

Specification Appearance

Translucent paste

White paste

Gray paste

Gray paste

White paste

Blue paste

Black paste

A: uniform blue colloid

B: uniform red colloid

A: translucent paste

B: translucent paste

300ml/ piece (20 pieces a box)

18kg/ barrel

300ml/ piece (20 pieces a box)

2600ml/ piece 25kg/ barrel

310ml/ piece

2600ml/ piece

25kg/ barrel

400g/ piece (20 piecesa box)

10kg/ barrel

380g/ piece (20 pieces a box)

10kg/ barrel

400ml/ piece 660ml/ piece

2600ml/ piece 25kg/ barrel

400ml/ piece 660ml/ piece

2600ml/ piece 25kg/ barrel

康达新材

27

Technical specification

WD6210

Product

model

310 ～ 400

Penetration

（1/10mm）

≥3.5x1014

Mass resistivity

（Ω•cm）

≥15

Electric strength

（kv•mm）

≤1%

Volatility

（200℃,24h）

≥1.1

heat conductivity

coefficient（W/m·k）

2.6±0.1

Density

（g/cm3）

-60-200

Operating time （℃）

Thermal grease (WD6210)

Product characteristics

Excellent scratchability, electrical insulation and

stability,low volatility, low oil separation, good material adaptability

Product application

Thermal coating of electronic, electrical and lighting components;thermal filling of temperature

sensor

Thermal grease

Packing

specification

1kg/tin

20L/barrel

Appearance

White paste

康达新材

28

MS adhesive

Technical specification

WD6601

WD6611

WD6621

WD6637

WD6699

Product

model

/

20 ～ 30

35 ～ 55

45 ～ 70

35 ～ 45

Hardness

（Shore A）

≥1.6

≥1.5

≥2

≥3

≥2

Tensile

strength(MPa)

≥1.2

≥0.5

≥0.8

≥2

≥1

Shear strength

（MPa）

≥350

≥300

≥300

≥300

≥350

Elongation

at break（%）

45±25

≤30

≤30

≤20

≤45

Tack free

time(min)

≥3.0

≥3.0

≥2.5

≥3.0

/

Curing speed

（mm/d）

-40 ～ 100

-40 ～ 100

-40 ～ 100

-40 ～ 100

-40 ～ 100

Operating

time(℃)

Modified silane sealing adhesive (WD6601)

Product characteristics

Long opening time, low viscosity,semi-flowing, easy scraping, high

strength after curing, excellent aging

resistance

Product application

Sealing of metal and surface treatment (painted or electroplated) metal,

plastic, glass, wood floor and other

materials between the gap or weld

Modified silane sealing adhesive (WD6611)

Product characteristics

No isocyanate, non-toxic and tasteless, no need to undercoat, can be

bonded to seal a variety of substrates,

low viscosity, semi-flowing, high infiltration

Product application

A variety of caulking seal bonding in

the electronic and electrical industry,

as well as the parts that require permanent elastic sealing and caulking

Modified silane sealing adhesive (WD6621)

Product characteristics

No isocyanate, non-toxic and tasteless, low viscosity, high thixotropy, no

need to undercoat, it can bond and

seal a variety of substrates with high

strength

Product application

Sealing and bonding of elevator, passenger car, train, heavy truck cab,

ship, container, air conditioning, ventilation pipeline, wind power blade

and other parts,as well as the parts

that require permanent elastic sealing Modified silane sealing adhe and caulking -

sive (WD6699)

Product characteristics

Two-component, fast curing, no isocyanate, non-toxic and tasteless, high

rebound, low temperature resistance,

vibration resistance, aging resistance,

thixotropy, can be bonded to seal a

variety of substrates

Product application

Automobiles, containers, machinery,

cold storage, buildings, wind power

blades, rail transit and other parts

that need to be sealed or bonded in a

large area

Modified silane sealing adhesive (WD6637)

Product characteristics

No isocyanate, non-toxic and tasteless, high viscosity, high thixotropy,

no need to undercoat, it can bond and

seal a variety of substrates with high

strength

Product application

Sealing and bonding of elevator, passenger car, train, heavy truck cab,

ship, container, air conditioning, ventilation pipeline, wind power blade

and other parts

Appearance

Yellow Paste

White

semi-flowing

Black/white/

gray paste

Black/white/

gray paste

A: white paste

B: white paste

Packing

specification

400ml/per piece(20piece per box)

600ml/per piece(20piece per box)

8kg/barrel

18kg/barrel

50ml per piece

300ml per piece

26kg/barrel

310ml/per piece(20piece per box)

600mi/per piece(20piece per box)

26kg/barrel

400ml/per piece(20piece per box)

600ml/per piece(20piece per box)

25kg/barrel

400ml/double barrel

25kg/barrel

康达新材

29

Uv curing adhesive (KD7005K)

Product characteristics

High bonding strength, wide variety of

bonding materials, excellent high

temperature resistance, aging resistance

Product application

All kinds of metal, plastic, fiberglass

and other materials bonding, mainly

used for bonding rigid or flexible, pvc

and pc materials

Uv curing adhesive (KD7022)

Product characteristics

High bonding strength can be used

for bonding assemblies with small

pipe tolerances, such as component

gaps less than 0.25mm

Product application

All kinds of metal, plastic, fiberglass

and other materials bonding, mainly

used for bonding rigid or flexible pvc

and pc materials

Uv curing adhesive (KD7202)

Product characteristics

The bonding strength is high and can

be used for bonding components with

small pipe tolerances, such as component gaps less than 0.25mm

Product application

All kinds of metal, plastic, fiberglass

and other materials bonding, mainly

used for bonding rigid or flexible pvc

and pc materials

Technical specification

KD7005K

KD7022

KD7202

Product model

PC/PC：≥10

PC/PC：≥5

PC/PC：≥18

Shear strength

（MPa）

2000 ～ 3000

3000 ～ 6000

3000 ～ 6000

Curing energy （mj）

≤2

≤2

≤2

Initial setting time

（s）

3500 ～ 7500

200 ～ 400

600 ～ 900

Viscosity

(mPa·s)

UV light curing adhesive

(structural adhesive)

Appearance

Colorless transparent

liquid

Colorless transparent

liquid

Colorless transparent

liquid

Packing

Specification

50g/ per piece (160 per box)

1kg/ barrel (10 barrels box)

50g/ per piece (160 per box)

1kg/ barrel (10 barrels box)

50g/ per piece (160 per box)

1kg/ barrel (10 barrels box)

康达新材

30

Technical specification

WD7910

WD7912

Product

model

Lv. 0

Lv. 0

Adhesive force

70.6

70.6

Electric strength

(kv/mm)

5.6×1014

5.6×1014

Mass resistivity

（Ω .cm）

75 ～ 125

50 ～ 125

Recommended

film thickness (um)

80 ～ 120

150 ～ 250

Viscosity

（mPa·s)

Uv three antiadhesive (WD7910)

Product characteristics

Ultraviolet light or room temperature moisture

double curing; excellent insulation, high breakdown voltage resistance, excellent weather resistance and chemical resistance

Product application

Suitable for the protection of circuit boards of different electronic and electrical products, and has

excellent insulation, moisture-proof, dust-proof

and other properties

Uv three antiadhesive (WD7912)

Product characteristics

Ultraviolet light or room temperature moisture

double curing; excellent insulation, high breakdown voltage resistance, excellent weather resistance and chemical resistance

Product application

Suitable for the protection of circuit boards of different electronic and electrical products, and has

excellent insulation, moisture-proof, dust-proof

and other properties

UV light curing adhesive

(three antiadhesive)

Appearance

Clear liquid

Clear liquid

Packing

specification

1kg per barrel

3kg per barrel

5kg per barrel

15kg per barrel

1kg per barrel

3kg per barrel

5kg per barrel

15kg per barrel

Thermal shock

leakage current (uA)

1.6 Before thermal shock

1.725 after thermal shock

1.6 Before thermal shock

1.725 after thermal shock

康达新材

31

Technical specification

WD8068

WD8710D

WD8710N

WD8710X

WD8711X

Product model

≥6

≥6

≥4

≥6

≥6

Shear strength

（MPa）

40 ～ 50

20 ～ 35

15 ～ 20

50 ～ 80

50 ～ 80

Operating time （min）

5:1

4:1

4:1

4:1

4:1

Ratio (mass)

A：40000 ～ 60000

B：200 ～ 300

A：4500 ～ 9000

B：150 ～ 350

Viscosity

（mPa·s)

A：7000 ～ 12000

B：150 ～ 350

A：4500 ～ 9000

B：150 ～ 350

A：25000 ～ 35000

B：159 ～ 350

Two-component polyurethane

adhesive (WD8068)

Product characteristics

High bonding strength, good toughness,

flame retardant and other characteristics, and good aging resistance

Product application

The bonding between various metal,

wood, plastic and hard foam materials

in shipbuilding, construction, transportation and other industries. It is specially used for the bonding of fireproof and

temperature-preserving materials for

fireproof doors, liquid irrigation of liquefaction ships and pipelines.

Two-component polyurethane adhesive

(WD8710X)

Product characteristics

Excellent adhesion to a variety of substrates; no irritating gas is produced during coating and curing. Excellent

freeze-thaw resistance.

Product application

Bonding of aluminum plate, aluminum-plastic board,

calcium silicate board, rock wool, eps polystyrene

board, xps extruded board and other materials.

Two-component polyurethane adhesive

(WD8711X)

Product characteristics

Excellent adhesion to a variety of substrates; no irritating gas is produced during coating and curing. Excellent

freeze-thaw resistance.

Product application

Bonding of aluminum plate, aluminum-plastic board,

calcium silicate board, rock wool, eps polystyrene

board, xps extruded board and other materials.

Two-component polyurethane

adhesive (WD8710D)

Product characteristics

Excellent adhesion to a variety of substrates; no irritating gas is produced

during coating and curing. Excellent

freeze-thaw resistance

Product application

Bonding of aluminum plate, aluminum-plastic board, calcium silicate

board, rock wool, eps polystyrene

board, xps extruded board and other

materials.

Two-component polyurethane

adhesive (WD8710N)

Product characteristics

Excellent adhesion to a variety of substrates; no irritating gas is produced

during coating and curing. Excellent

freeze-thaw resistance

Product application

Bonding of aluminum plate, aluminum-plastic board, calcium silicate

board, rock wool, eps polystyrene

board, xps extruded board and other

materials

Two-component

polyurethane adhesive

Appearance

A: milky white uniform colloid

B: brown uniform colloid

A: milky white viscous body

B: yellowish-brown liquid

A: milky white viscous body

with yellowish phase

B: yellowish brown liquid

A: milky white viscous body

with yellowish phase

B: yellowish brown liquid

A: milky white viscous body

with yellowish phase

B: yellowish brown liquid

Packing specification

A: 1500kg per barrel

B: 2000kg per barrel

A: 1500kg per barrel

B: 200kg per barrel

A: 1500kg per barrel

B: 200kg per barrel

A: 1500kg per barrel

B: 200kg per barrel

A: 5kg per barrel

B: 1kg per barrel

康达新材

32

Technical specification

WD8010

WD8778

Product model

50 ～ 60

55 ～ 60

Hardness

(Shore A)

≥2

≥20

bulk tensile

strength (MPa)

≥80

≥120

breaking

elongation (%)

≥15min

35 ～ 45

gelation time

（25℃/60g)

3:1

1:1

Ratio

(mass)

A：570 ～ 870

B：50 ～ 190

A：900

B：700

Viscosity

（mPa·s)

Two-component polyurethane potting adhesive (WD8778)

Product characteristics

Good operating fluidity, high bonding strength after

curing, good toughness, excellent stripping resistance,

and good acid, alkali and aging resistance

Product application

Potting and bonding of various substrates on different

occasions, especially suitable for potting and bonding

of film in water

Polyurethane adhesive -

Two component potting adhesive

Packing

specification

A: 18kg a barrel

B: 18kga barrel

A: 20kg a barrel

B: 20kga barrel

Cured color

Light yellow

elastic solid

Light amber

solid

Appearance

A: beige or light

white liquid

B: brown liquid

A: milky liquid

B: amber

transparent liquid

Electronic potting adhesive (WD8010)

Product characteristics

Low viscosity, easy to stir, easy to flow, to meet

the needs of small hole filling, room temperature

curing, low hardness, good flexibility, electrical

insulation resistance and material hydrophobicity

excellent, 100% solid content, no voc

Product application

Waterproof insulation potting of electronic components, sensors, etc. Especially recommended as a

waterproof, insulating potting material for proximity switch sensors.

Technical specification

WD8307

WD8308

WD8309

WD8318

WD8319

WD8510

Product model

PP/PVC ≥0.8

PVC/PVC ≥1.5

PC/PC ≥7.0

PVC/PVC ≥1.5

PC/PC ≥7.0

PVC/PVC ≥1.5

PC/PC ≥7.0

PVC/PVC ≥1.5

PC/PC ≥7.0

≥1.5

Shear strength

（MPa）

1000 ～ 3000

1400 ～ 3500

5500 ～ 10000

1400 ～ 3000

5500 ～ 10000

／

Viscosity

（mPa·s) Packing specification

Polyurethane type plastic adhesive (WD8307)

Product characteristics

Room temperature curing, high bonding strength, water resistance, weak

acid and alkali resistance

Product application

Plexiglass, polystyrene, pvc, pp, abs,

leather, rubber, metal, glass, wood

and other materials bonding.

Plastic thread locking agent

(WD8318)

Product characteristics

Solvent-free, low viscosity, room temperature curing, high bonding

strength, oil resistance, acid and

alkali resistance

Product application

Plexiglass, polystyrene, abs, pc, pvc,

leather, rubber and other plastics can

also be bonded to metal, glass, wood

and so on

High toughness structural adhesive (WD8319)

Product characteristics

Non-soluble agent, large viscosity,

slow flow, room temperature solidification, high bonding strength, oil

resistance, acid and alkali resistance

Product application

Bonding steel, iron, aluminum, titanium,

stainless steel and other metal materials, can

also be bonded abs, hard pvc, ps, pc, pmma,

pu and other materials, as well as between

the sleeve plastic and metal bar bonding, in

addition to composite materials, wood, etc.,

also has a good bonding effect.

Solventless plastic adhesive

(WD8308)

Product characteristics

Solvent-free, low viscosity, room temperature curing, high bonding

strength, oil resistance, acid and

alkali resistance.

Product application

Plexiglass, polystyrene, abs, pc, pvc,

leather, rubber and other plastics can

also be bonded to metal, glass, wood

and so on.

Thixotropic polyurethane plastic adhesive (WD8309)

Product characteristics

Non-soluble agent, large viscosity,

slow flow, room temperature solidification, high bonding strength, oil

resistance, acid and alkali resistance

Product application

Plexiglass, polystyrene, abs, pc, pvc,

leather, rubber, plastic bonding, can

also be bonded to metal, glass, wood

and so on

One component polyurethane

sealant (WD8510)

Product characteristics

High elasticity, strong tear resistance,

weathering resistance, uv resistance,

aging resistance

Product application

Bonding of steel, anodized aluminum,

painted metal, wood, polyurethane,

concrete, glass, rubber, plastic, fiberglass and other materials

Polyurethane adhesive -

one component adhesive sealant

Appearance

Colorless or light yellow

transparent viscous liquid

Pale yellow fluid

Light yellow viscous fluid

Pale yellow fluid

Light yellow viscous fluid

White paste

900g a tin(12tins per box)

900g a tin(12tins per box)

900g a tin(12tins per box)

80g per branch

(100 branches per box)

80g per branch

(100 branches per box)

60ml per branch

(100 branches per box)

康达新材

33

康达新材

34

Technical specification

WD8547

WD8549

WD8549M

WD8550

WD8551

WD8560

WD8612H

Product model

120 ～ 150

120 ～ 150

120 ～ 150

120 ～ 150

120 ～ 150

120 ～ 150

120 ～ 150

Sizing

temperature(℃)

0.5 ～ 2

1～4

2～4

1～3

1～3

≤10

1～3

Opening time

(min)

2 ～ 10

≤10

≤20

2 ～ 10

≤30

≤30

2 ～ 10

Sizing temperature

(min/1mm)

120 ～ 150

130 ～ 160

130 ～ 160

130 ～ 160

130 ～ 160

120 ～ 150

120 ～ 150

Glue

temperature (℃)

7000 ～ 12000

9000 ～ 18000

12000 ～ 28000

10000 ～ 20000

2000 ～ 3500

10000 ～ 30000

10000 ～ 20000

Viscosity

（mPa·s/120℃)

PUR adhesive (WD8547)

Product characteristics

High initial strength, short opening

time, fast positioning speed.

Product application

Wood, fiber board, plastic material (pp

needs to be processed), density board

and leather, carpet, needle felt cloth,

fabric and other materials bonding.

PUR adhesive (WD8549)

Product characteristics

Short opening time, fast positioning

speed, high bonding strength.

Product application

Short opening time, fast positioning

speed, high bonding strength.

PUR adhesive (WD8560)

Product characteristics

High initial adhesion, fast positioning

speed, good sealing performance

Product application

In automobile interior decoration and

traffic lights, pvc, abs, pmma, pp and

other materials after corona treatment

have good bonding properties.

PUR adhesive (WD8549M)

Product characteristics

Short opening time, fast positioning

speed, high bonding strength

Product application

Automotive interior wood, fiberboard,

plastic (pp needs to be processed), metal,

carpet, needle felt cloth, fabric, foam and

other materials assembled and bonded

PUR adhesive (WD8551)

Product characteristics

Thin viscosity, good wetting, short

opening time, fast positioning speed,

high bonding strength.

Product application

Automobile interior decoration wood,

phenolic/fiber molding board, plastic

(pp needs to be treated) and other materials bonding, suitable for spray coating process operation.

PUR adhesive (WD8550)

Product characteristics

Short opening time, fast positioning

speed, high bonding strength

Product application

Automotive interior wood, fiberboard, plas- tic (pp needs to be processed), metal,

carpet, needle felt cloth, fabric, foam and

other materials assembled and bonded

PUR adhesive (WD8612H)

Product characteristics

Long opening time, large initial adhesion,

high bond strength

Product application

Wood, fiber board, plastic material (pp needs

to be processed), density board and leather,

carpet, needle felt cloth, fabric and other ma- terials bonding, used for the assembly of

automotive interior parts

PUR adhesive

Molten

appearance

light yellow transparent liquid

light yellow transparent liquid

light yellow transparent liquid

light yellow transparent liquid

black viscous liquid

black viscous liquid

light yellow transparent liquid

Packing

specification

20kg per branch

25kg per barrel

200kg per barrel

20kg per branch

25kg per barrel

200kg per barrel

20kg per branch

25kg per barrel

200kg per barrel

20kg per branch

25kg per barrel

200kg per barrel

20kg per branch

25kg per barrel

200kg per barrel

310g per branch

20kg per barrel

200kg per barrel

310g per branch

20kg per barrel

200kg per barrel

康达新材

35

Technical specification

WD2206

WD2225

WD2521

Product model

≥15

≥15

≥15

90° Peel strength （KN/m）

R

R

R

Sample failure type

22 ～ 26

22 ～ 26

25 ～ 29

Non-volatile

matter content(%)

100 ～ 700

100 ～ 450

300 ～ 1300

Viscosity （mPa·s/120℃)

Substrate surface treatment

agent (WD2206)

Product characteristics

Excellent adhesion, wide adaptability,

can be bonded to iron, steel, aluminum,

galvanized, brass, nylon, ceramic and

other hard substrates and substrate

adhesion performance.

Product application

Used in conjunction with \"wanda\"

rubber surface treatment agent, various vulcanized or unvulcanized rubber

materials can be bonded together with

metal and other hard substrates.

Rubber surface treatment

agent (WD2225)

Product characteristics

Excellent adhesion, wide adaptability,

can be bonded to natural rubber, styrene butadiene rubber, partial neoprene rubber, partial nitrile rubber and

polyisoprene rubber and other elastomers

Product application

Used in conjunction with \"wanda\"

rubber surface treatment agent, various vulcanized or unvulcanized rubber

materials can be bonded together with

metal and other hard substrates.

Adhesive surface treatment

agent (WD2521)

Product characteristics

Excellent adhesion, wide adaptability,

can be bonded to iron, steel, aluminum,

galvanized, brass, nylon, ceramics and

other hard substrates, and natural

rubber, styrene butadiene rubber, neoprene rubber, butyl rubber, epdm

rubber, recycled rubber and other good

bonding performance

Product application

It can be used alone or in combination

with a substrate surface treatment

agent to bond a variety of vulcanized or

unvulcanized rubber materials to gold

and other hard substrates

Structural adhesive

(hot vulcanized adhesive)

Packing

specification

1kg per tin

3kg per tin

17kg per tin

1kg per tin

3kg per tin

18kg per tin

1kg per tin

3.5kg per tin

18kg per tin

Appearance

Gray liquor

Black liquor

Black liquor

Main solvent

Methyl isobutyl

ketone

Xylene,

trichloroethylene

Xylene

康达新材

36

Technical specification

WD8325

WD8331

≥35

≥40

Tear strength

（KG/cm）

≥7

≥7

Tensile strength （MPa）

≥300

≥250

Elongation at

break （%）

70 ～ 85

82 ～ 90

Hardness

(Shore A)

1:1

1:1

Ratio

(volume)

Packing

specification

Instant rubber repair agent

(WD8325)

Product characteristics

No primer, no solvent, fast curing,

efficient construction, impact and

wear resistance

Product application

It is specialized in repairing rubber

wear and fall off in busy occasions

such as mines, power plants, chemical industry, smelting and docks,

improving production efficiency and

saving operating costs for industrial

and mining enterprises

Instant rubber repair agent

(WD8331)

Product characteristics

No primer, no solvent, fast curing,

efficient construction, impact and

wear resistance

Product application

It is specialized in repairing rubber

wear and fall off in busy occasions

such as mines, power plants, chemical industry, smelting and docks,

improving production efficiency and

saving operating costs for industrial

and mining enterprises

Structural adhesive for

quick rubber repair agent

Appearance

A: light yellow or light

white transparent liquid

B: black liquid

A: clear light yellow liquid

B: black liquid

Double tube loading:

430g/ set (20 sets/box)

Canned: 430g/ set

(12 sets/box)

T-peel strength

（N/cm）

≥25 or substrate

damage

≥25 or substrate

damage

Cured color

Black elastic

solid

Black elastic

solid

Product

model

康达新材

37

Technical specification

WD881

Product

model Base material Bonding strength Non-volatile matter

content(%)

A：18 ～ 24

B：19 ～ 21

Viscosity （mPa·s/120℃)

A：1200 ～ 2400

B：/

Appearance

Adhesive for conveyor belt (WD881)

Product characteristics

High strength, high toughness

Product application

Self-adhesive or mutual adhesive between conveyor belt, rubber, leather, ceramic, fabric, metal and

other materials.

Neoprene

A: light yellow, brown or

brown viscous liquid

B: dark red liquid

48h shear strength ≥0.22MPa

48h peel strength ≥37.5N/2.5cm

Packing specification

A+B=800g+80g/ set

(12 sets/box)

Structural adhesive for

conveyor belt adhesive

康达新材

38

Technical specification

KD4435

KD4454

KD4460

KD4480

KD4495

Product model

100 ～ 250

15000 ～ 25000

30 ～ 50

100 ～ 200

20 ～ 60

Viscosity

（mPa·s) Appearance Positioning time （S）

Al：30 ～ 60

PC：45 ～ 60

Al：2 ～ 10

PC：10 ～ 15

Al：5 ～ 10

PC：10 ～ 20

Al：10 ～ 30

PC：30 ～ 90

Al：3 ～ 5

PC：10 ～ 15

Shear strength （MPa）

Al/Al：12 ～ 17

PC/PC：4 ～ 6

Al/Al：14 ～ 22

PC/PC：7 ～ 20

Al/Al：15 ～ 20

PC/PC：5 ～ 9

Al/Al：14 ～ 22

PC/PC：5 ～ 20

Al/Al：12 ～ 19

PC/PC：5 ～ 20

Packing

specification

Instant adhesive (KD4435)

Product characteristics

Toughened type, impact resistance

Product application

Fast bonding of various materials, including

metals, plastics and elastomers, as well as porous

and absorbent materials such as wood, paper,

leather and fabrics

Instant adhesive (KD4454)

Product characteristics

Universal, high viscosity gel

Product application

Fast bonding of various materials including metals,

plastics and elastomers as well as porous and

absorbent materials such as wood, paper, leather

and fabrics

Instant adhesive (KD4460)

Product characteristics

No bleaching, low viscosity, low odor

Product application

End products with strict requirements for appearance and working

environment with low odor requirements

Instant adhesive (KD4480)

Product characteristics

Toughened type, impact resistance

Product application

Adhesive rubber, metal and plastic.

Instant adhesive (KD4495)

Product characteristics

Universal, medium and low viscosity

Product application

Adhesive rubber, metal and plastic,

can fill 0.1mm gap

Instant adhesive

Clear colorless liquid 20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

Clear gel

Clear colorless liquid

Black liquid

Colorless transparent

to light straw liquid

康达新材

39

Instant adhesive (KD4401)

Product characteristics

Universal, low viscosity

Product application

Fast bonding of various materials,

including metals, plastics and elastomers, as well as porous and absorbent materials such as wood, paper,

leather and fabrics.

Instant adhesive (KD4410)

Product characteristics

Toughened type, high viscosity

Product application

Adhesive rubber, metal and plastic.

Instant adhesive (KD4411)

Product characteristics

Universal, peel resistance, high temperature resistance.

Product application

Gap filling, suitable for bonding

rubber, plastic and metal.

Instant adhesive (KD4412)

Product characteristics

Disassembly by impact

Product application

Temporary bonding applications of

metal and glass

Instant adhesive (KD4417)

Product characteristics

Disassembly by impact

Product application

Temporary bonding applications of

metal and glass

Instant adhesive (KD4420)

Product characteristics

Universal, permeable grade

Product application

Bonding electronic components,

leather, metal, plastic and other materials.

Instant adhesive (KD4431)

Product characteristics

Toughened type, impact resistance

Product application

Fast bonding of various materials,

including metals, plastics and elastomers, as well as porous and absorbent materials such as wood, paper,

leather and fabrics

Instant adhesive (KD4403)

Product characteristics

Low odor, low albino type, medium

viscosity

Product application

Fast bonding of various materials,

including metals, plastics and elastomers, as well as porous and absorbent materials such as wood, paper,

leather and fabrics

Instant adhesive (KD4406)

Product characteristics

Universal, low viscosity

Product application

Fast bonding of plastics and elastic

materials

Instant adhesive

康达新材

40

Technical specification

KD4401

KD4403

KD4406

KD4410

KD4411

KD4412

KD4417

KD4420

KD4431

Product model

100 ～ 110

1000 ～ 1450

15 ～ 25

1700 ～ 5000

4000 ～ 8000

20 ～ 60

≤50

≤50

800 ～ 1200

Viscosity

（mPa·s)

Positioning time （S）

Al：3 ～ 5

PC：5 ～ 10

Al：5 ～ 20

PC：10 ～ 20

Al：2 ～ 10

PC：10 ～ 20

Al：10 ～ 30

PC：50 ～ 100

Al：10 ～ 30

PC：30 ～ 70

Al：10 ～ 30

PC：30 ～ 60

Al：10 ～ 30

PC：30 ～ 60

Al：5 ～ 15

PC：30 ～ 60

Al：10 ～ 20

PC：45 ～ 60

Shear strength （MPa）

Al/Al：11 ～ 19

PC/PC：5 ～ 20

Al/Al：9 ～ 15

PC/PC：3 ～ 10

Al/Al：11 ～ 19

PC/PC：6 ～ 8

Al/Al：12 ～ 18

PC/PC：5 ～ 8

Al/Al：11 ～ 19

PC/PC：5 ～ 8

Al/Al：3 ～ 5

PC/PC：1 ～ 5

Al/Al：1 ～ 3

PC/PC：1 ～ 2

Al/Al：13 ～ 17

PC/PC：10 ～ 12

Al/Al：15 ～ 20

PC/PC：5 ～ 10

Packing

specification

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

Appearance

Clear colorless liquid

Water white liquid

Clear colorless to

straw-colored liquid

Clear colorless to

straw-colored liquid

Clear colorless to

straw-colored liquid

Black liquid

Clear colorless liquid

Clear colorless liquid

Clear colorless liquid

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

20g/ PCS (100 PCS/box)

500g/ bottle (12 bottles/box)

康达新材

41

Technical specification

WD2080

WD2102

WD2104-1

WD2104-2

WD2104H 高

WD2104H

Product model

2000 ～ 4000

2000 ～ 3000

1500 ～ 2500

1000 ～ 3000

12000 ～ 15000

4000 ～ 6000

Viscosity

（mPa·s)

26 ～ 32

44 ～ 50

43 ～ 49

38 ～ 44

53 ～ 57

46 ～ 52

Non-volatile matter

content（%） Bonding strength

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥25N/2.5cm

/

Strong rubber adhesive

(WD2080)

Product characteristics

Fast positioning, high bonding

strength

Product application

Bonding metal, rubber, plastic, wood,

concrete, leather and other bonding

metal, rubber, plastic, wood, concrete, leather and other materials

Transparent plastic adhesive

(WD2104H high)

Product characteristics

High bonding strength, fast curing,

transparent adhesive layer, strong

versatility

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Broad spectrum polyolefin adhesive (WD2102)

Product characteristics

High bonding strength, fast curing,

strong versatility

Product application

Bonding polypropylene, polyethylene,

abs, hard polyvinyl chloride, eva and

other plastics materials

Transparent plastic adhesive

(WD2104-1)

Product characteristics

High bonding strength, fast curing,

transparent adhesive layer less bubbles

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Transparent plastic adhesive

(WD2104H)

Product characteristics

High bonding strength, fast curing,

transparent adhesive layer, strong

versatility

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Solvent adhesive

Foam adhesive (WD2104-2)

Product characteristics

Adhesive layer transparent, high

bonding strength, fast curing, environmental protection, almost no corrosion foam and environmental protection

Product application

Bonding of polystyrene foam materials, polypropylene, polyethylene, abs,

eva and other plastics

Base material

Neoprene

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Brown thick liquid

Appearance

Brown thick liquid

Colorless or light yellow

transparent viscous liquid

Colorless or light yellow

transparent viscous liquid

Colorless or light yellow

transparent viscous liquid

Colorless or light yellow

transparent viscous liquid

Packing specification

85g/ PCS

(100 PCS/box)

700g/ tin (12 tins/box)

3kg/ tin (4 tins/box)

15kg/tin

15kg/tin

15kg/tin

15kg/tin

康达新材

42

Technical specification

WD2189

WD2609

WD2888

WD6000

WD801

Product model

45000 ～ 100000

40000 ～ 60000

50 ～ 150

5000 ～ 10000

4000 ～ 5000

Viscosity

（mPa·s)

50 ～ 55

/

12 ～ 18

45 ～ 50

22.5 ～ 28.5

Non-volatile matter

content（%）

Automotive duct adhesive

(WD2189)

Product characteristics

High bonding strength, vertical plane

glue does not flow, smooth and full

after curing

Product application

Adhesion of polypropylene, polyethylene, abs, soft polyvinyl chloride,

eva, tpr and other plastics

Polymer liquid sealant (WD2609)

Product characteristics

Good elasticity, resistance to vibration, temperature, pressure and

medium

Product application

Sealing of plane flanges and thread

connections in vehicle and ship, agricultural machinery, chemical, electrical and other industries

Self-leveling adhesive (WD6000)

Product characteristics

High strength, high toughness, adhesive layer can be painted

Product application

Bonding of wood, metal, glass, glass

steel, ceramic, stone and concrete

Super glue (WD801)

Product characteristics

The initial adhesion is strong, the final

adhesion is high, and the toughness is

good

Product application

Self-adhesive or cross-adhesive of

metal, rubber, plastic, wood, concrete, ceramic, fabric and leather

Solvent adhesive

Rubber tube adhesive (WD2888)

Product characteristics

The initial adhesive strength is

strong, the final adhesive strength is

high, it has good toughness, impact

resistance, water resistance, medium

resistance and aging resistance are

good, and the adhesion time is long

Product application

Winding and bonding of rubber hose

with braided wire

Packing specification

3kg/ tin (4 tins/box)

15kg/ tin

700g/ tin(12 tins/box)

15kg/ tin

860g/tin (12 tins/box)

3.6kg/ tin (4 tins/box)

15kg/ tin

90g/ PCS (100 PCS/box)

/ 15kg/ tin

/

Bonding strength

T peel strength

(canvas/canvas)

≥75n/2.5cm

With stand pressure

(room temperature)

≥8mpa

180° peel strength

≥30n/cm

Appearance

Black viscous

liquid

Gray-green viscous

liquid

Drab yellow or yellowish

brown liquid

Light colored viscous

liquid

Yellow viscous liquid

Base material

Tpe (thermoplastic

elastomer)

Tpe (thermoplastic

elastomer)

Chemigum

Neoprene

Neoprene

康达新材

43

Transparent polyolefin adhesive (WD2104T)

Product characteristics

High bonding strength, transparent

adhesive layer, no \"polycyclic aromatic hydrocarbons, nonylphenol\"

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Transparent polyolefin adhesive (WD2104)

Product characteristics

High bonding strength, fast curing,

transparent adhesive layer, strong

universal

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Fast drying plastic pipe adhesive (WD2166)

Product characteristics

High bonding strength, fast curing,

transparent adhesive layer

Product application

Polypropylene, polyethylene, abs,

hard pvc, eva and other plastic pipe

bonding

Environmentally friendly polyolefin adhesive (WD2105)

Product characteristics

High bonding strength, no \"polycyclic

aromatic hydrocarbons, nonylphenol,

benzene, toluene, xylene\", low odor

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Wide spectrum plastic adhesive (WD2106)

Product characteristics

High bonding strength, no \"benzene,

toluene, xylene\", low odor

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and other

plastics bonding

Polystyrene foam adhesive

(WD2136)

Product characteristics

High initial adhesion, almost non-corrosive foam, can be sprayed

Product application

Bonding polystyrene foam, can also

be used for bonding pp, pe and other

materials

Solvent adhesive

Adhesive (WD2108)

Product characteristics

High bonding strength, fast curing,

almost no corrosion foam and environmental protection

Product application

Bonding of polystyrene foam materials, polypropylene, polyethylene,

abs, eva and other plastics

Plastic adhesive (WD2123)

Product characteristics

Grafted adhesive with high bonding

strength and transparent adhesive

layer

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and

other plastics bonding. It can also

be used for the joint of plastic hard

pipe and soft material with small

product gap

Polyolefin spray (WD2124)

Product characteristics

High bonding strength, fast curing,

transparent adhesive layer, can be

sprayed

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and

other plastics bonding

Plastic adhesive (WD2119)

Product characteristics

Grafted adhesive with high bonding

strength and transparent adhesive

layer

Product application

Polypropylene, polyethylene, abs,

hard polyvinyl chloride, eva and

other plastics bonding

ABS adhesive (WD2138)

Product characteristics

Fast curing, good water resistance,

non-toxic after curing

Product application

Bonding abs, as, rigid pvc and ps

bonding

康达新材

44

WD2119

WD2123

WD2124

WD2136

WD2138

WD2166

Technical specification

WD2104T

WD2104

WD2105

WD2106

WD2108

Product

model

4000 ～ 8000

10 ～ 100

100 ～ 400

200 ～ 400

500 ～ 1000

7000 ～ 10000

2000 ～ 3000

2000 ～ 3000

800 ～ 2000

1500 ～ 3000

400 ～ 1000

Viscosity

（mPa·s)

50 ～ 55

18 ～ 24

30 ～ 36

40 ～ 46

25 ～ 31

38 ～ 42

47 ～ 52

42 ～ 48

42 ～ 45

43 ～ 48

36 ～ 40

Non-volatile matter

content（%）

/

Bonding strength

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥14N/2.5cm

90° Peel strength

≥25N/2.5cm

90° Peel strength

≥15N/2.5cm

Shear strength

≥1MPa

90° Peel strength

≥25N/2.5cm

T Peel strength

(canvas/canvas)

≥25N/2.5cm

T Peel strength

(canvas/canvas)

≥50N/2.5cm

90° Peel strength

≥25N/2.5cm

Appearance

Colorless or light yellow

transparent viscous liquid

Colorless or light yellow

transparent viscous liquid

Colorless or light yellow

transparent viscous liquid

Colorless or light yellow

transparent viscous liquid

Pale yellow translucent

viscous liquid

Pale yellow translucent

viscous liquid

Brown viscous liquid

Milky liquid

Brown thick liquid

Colorless or light yellow

transparent viscous liquid

Brown viscous liquid

Base material

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Tpe(thermoplastic

elastomer)

Abs resin (main

component)

Tpe(thermoplastic

elastomer)

15kg/ 听

15kg/ tin

13kg/ tin

Packing specification

15kg/ tin

700g/tin (12 tins/box)

3kg/ tin (4 tins/box)

15kg/ tin

700g/tin (12 tins/box)

3kg/ tin (4 tins/box)

15kg/ tin

700g/tin (12 tins/box)

3kg/ tin (4 tins/box)

15kg/ tin

700g/tin (12 tins/box)

3kg/ tin (4 tins/box)

15kg/ tin

700g/tin (12 tins/box)

3kg/ tin (4 tins/box)

15kg/ tin

700g/tin (12 tins/box)

14kg/ tin

700g/tin (12 tins/box)

康达新材

45

Technical specification

WD7049

WD7754

WD7754B

WD7755

WD7755B

Product model

Rust reliever (WD7754)

Product characteristics

Loose rust penetration, rust prevention, lubrication, washing

Product application

Maintenance, installation and cleaning of various vehicles, ships, machine tools, motor hardware tools,

construction metallurgical machinery, petrochemical machinery, etc

Rust remover (WD7754B)

Product characteristics

Eliminate noise, discharge moisture,

clean and rust prevention, loosen

rust parts, dissolve solid impurities

Product application

Loosen corroded threads and other

fastening connectors, can lubricate

relative moving mechanical parts,

prevent metal parts, mold surface

rust

Anaerobic adhesive curing accelerator (WD7049)

Product characteristics

The curing speed of the anaerobic

adhesive was improved by combining

the surfactant used in the anaerobic

adhesive

Product application

Use of transition metals and inert surfaces and anaerobic adhesives

between large gaps

Precision instrument cleaner

(WD7755B)

Product characteristics

Environmental protection, strong, safe

Product application

Clean computer circuit board, program

control, cnc equipment and other precision instrument internal circuit

board, components surface oil, dust

Cleaning agent (WD7755)

Product characteristics

Non-combustible, non-toxic,

short-term anti-rust effect, no corrosion to steel, iron, aluminum and

other metals

Product application

Rapid cleaning of precision instruments, meters, clock parts, electronic components, mechanical parts,

molds and other tools

Surface treatment agent

Product type

200ml/ can (40 cans/box)

460g/ can (24 cans/box)

460g/ can (24 cans/box)

450ml/ can (24 cans/box)

450ml/ can (24 cans/box)

Appearance

Green transparent

liquid

Colorless or amber

liquid

Transparent liquid

Transparent liquid

Transparent liquid

Product name

Anaerobic adhesive

curing agent

High-efficiency

loosening lubricant

Cleaning agent for

precision instruments

Cleaning agent

Rust reliever

www.shkdchem.com

KANGDA NEW MATERIALS (GROUP) CO.，LTD

Add: No.169 Leizhou Road , Fengxian Area, Shanghai, China, PC: 201419

Tel：021- 6891 8998 Fax：021- 6891 9719