NEVER allow children to climb or hang on furniture, including

drawers or cabinet doors.

Children have died from furniture tipover. Tip restraints have

been included with this product; you must install the tip restraints

according to these instructions in order to minimize the risk of

furniture tipping. If you have any questions about this product or

the tip restraint, please send us an email at

tip_restraint_help@Noblehousefurniture.com

WARNING!!

In addition to installing the restrains, to help prevent tip-over

1. For use with televisions weighing 31.3 lbs or fewer. Use with

heavier televisions may result in instability causing tip-over

resulting in death or serius injury. NEVER use with CRT

televisions

2. Do not stand on the product

Noble house Home Furnishings LLC Page 1 OF 14

Label Picture QTY

A 1

B 1

C 1

D 1

E 1

Left Side Panel

Top Panel

Description

Right Center Panel

Left Center Panel

Right Side Panel

Caution : You must read this before you proceed

TV CABINET

Noble house Home Furnishings LLC Page 2 OF 14

F 1

G 1

H 1

I 1

J 1

K 2

L 4

M 4

Leg Support

Bottom Panel

Shelf Panel

Leg

(with PVC Nail Leg)

Handle

Back Panel

Right Door Panel

Left Door Panel

Noble house Home Furnishings LLC Page 3 OF 14

Label Picture QTY

① 9

② 9

③ 9

④ 17

⑤ 9

⑥ 17

⑦ 21

⑧ 5

⑨ 4

⑩ 21

⑪ 5

⑫ 1

⑬ 1

⑭ 1

⑮ 1

Screw(M4*25mm)

Screw (M3.5*16mm)

Cap Wood Screw

(M6*60mm)

Positioning Dowel

(φ8*30mm)

Cam Cap

Cam Bolt

Cam Lock

Description

Screwdriver (not provided)

Metal Shelf Support

Nail

Hammer (not provided)

Connector

Allen Key

Power Drill (not provided)

Screw(M4*20mm)

Noble house Home Furnishings LLC Page 4 OF 14

⑯ 4

⑰ 2

⑱ 2

⑲ 2

⑳ 2

Wall Plug Screw

Pan Head Screw

Wall Plug

Cabinet Restraint Device Hardware

Metal Bracket

Cabinet Restraint Strap

Before

Beginning

Assembly:

X 9 X 9 X 9

X 17 X 9 X 17

X 4

X 21

X 1

X 5

X 5

X 1

X 1 X 1

X 2 X 4 X 2

X 4

X 21

Noble house Home Furnishings LLC Page 5 OF 14

Step 1

This TV Cabinet has multiple parts and may require up to 60 minutes

to assemble. To give you an overview of the TV Cabinet parts, the

above picture is to help you put the various parts into perspective.

Please read through the instructions below to familiarise yourself with

the parts and steps before assembly.

Unpack and place all parts on a clean, non-marring surface.

Attach Cam Bolts(②) to mounting positions on Top Panel(A) with

Screwdriver(⑬).

Overview

FRONT FACING

Left Side Panel (B)

A

Top Panel (A)

Right Door Panel (G)

Shelf Panel (J)

Right Side Panel (C)

Bottom Panel (I)

Right Center Panel (E)

Left Door Panel (F) Back Panel (H)

②

⑬

PVC Handle (K)

Leg (M)

Left Center Panel (D)

Leg Support (L)

Noble house Home Furnishings LLC Page 6 OF 14

Step 2

Step 3

2.1) Insert Cam Locks(①) into mounting positions on Left Side

Panel(B) by hand.

2.2) Insert Positioning Dowels(④) into mounting positions on Left Side

Panel(B) by hand.

2.3) Repeat the same assembly process with the Right Side Panel(C).

3.1) Insert Cam Locks(①) into mounting positions on Left Center

Panel(D) by hand.

3.2) Insert Positioning Dowels(④) into mounting positions on Left

Center Panel(D) by hand.

3.3) Insert Metal Shelf Supports(⑪) into mounting positions on Left

Center Panel(D) by hand.

3.4) Repeat the same assembly process with the Right Center

Panel(E).

B

①

① ④ ④

④

④

⑪

①

D

④

3.3

④

④

④

④

④

①

①

①

C

E

3.1

3.2

①

①

①

④

④ ④

④

④

④

④

④

2.1 2.2

Noble house Home Furnishings LLC Page 7 OF 14

Step 4

Step 5

Attach Connectors(⑨) to Left Door Panel(F) and Right Door Panel(G)

with Screws(⑥) using Screwdriver(⑬).

Tighten the Screws fully in a sequential manner.

Note: There are pre-existing mounting positions on Left Door

Panel(F) and Right Door Panel(G) to fix the Connectors(⑨).

Attach Handles(K) to Left Door Panel(F) and Right Door Panel(G) with

Screws(⑧) using Screwdriver(⑬).

Tighten the Screws fully in a sequential manner.

Note: There are pre-existing mounting positions on Left Door

Panel(F) and Right Door Panel(G) to attach the Handles(K).

F G

⑬

⑬

⑨ ⑨ ⑨ ⑨

⑨

⑥

⑥

⑧

⑬ ⑧

K K

K

⑧

⑧

⑧

⑧

⑬

F G

Noble house Home Furnishings LLC Page 8 OF 14

Step 6

Step 7

6.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right Side

Panel(C), Left Center Panel(D) and Right Center Panel(E) into

mounting positions on Top Panel(A).

Note: Ensure the arrows on Cam Locks head points towards the

Cam Bolt mounting positions.

6.2) Insert the mounting positions on sides of Left Side Panel(B), Right

Side Panel(C), Left Center Panel(D) and Right Center Panel(E) onto

Cam Bolts(②) on Top Panel(A).

6.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑬) until

they all lock into place.

7.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right Side

Panel(C), Left Center Panel(D) and Right Center Panel(E) into

mounting positions on Bottom Panel(I).

7.2) Attach Bottom Panel(I) to Cabinet Assembly using Cap Wood

Screws(⑤) with Allen Key(⑫).

Tighten the Cap Wood Screws fully in a sequential manner.

Arrow NOTE

Cam Bolt Mounting Position

⑫

⑤

④

7.1

7.2

A B

C

D

E ①

②

I C

B

D

E

① ④

④

①

⑬

② 6.2

6.1

6.3

Noble house Home Furnishings LLC Page 9 OF 14

Step 8

Step 9

Step 10

Step 11

Flip the whole Cabinet over.

Attach Back Panel(H) to Cabinet Assembly using Nails(⑩) with

Hammer(⑭).

Caution: Please be extra careful when using a hammer to avoid

injury.

Note: Hit Nails(⑩) along all four edges (slightly inwards from

sides) on the lines drawn on the Back Panel(H).

Attach Leg Supports(L) to Bottom Panel(I) using Screws(⑦) with

Screwdriver(⑬).

Tighten the Screws fully in a sequential manner.

Note: There are pre-existing mounting positions on the Bottom

Panel(I) to attach the Leg Supports(L).

Attach Legs(M) to Leg Supports(L) by rotating clockwise by hand.

Attach Cam Caps(③) to all Cam Locks(①) by hand.

CAUTION

⑩

H ⑭

I

⑦ L

⑬

L

M

⑦

⑦ ⑦

M

③

③

③

③

③

③

③

③

③

Note

⑩

⑩ ⑩

⑦

Noble house Home Furnishings LLC Page 10 OF 14

Step 12

Step 13

Put Shelf Panel(J) in place on Metal Shelf Supports(⑪).

Note: There are lead mounting positions on Shelf Panel(J) to fit

Metal Shelf Supports(⑪).

12.1) Attach Connectors(⑨) to Left Side Panel(B) and Right Side

Panel(C) with Screws(⑥) using Screwdriver(⑬).

Tighten the Screws fully in a sequential manner.

12.2) Rotate first screw on Connectors(⑨) to adjust left-right position

of Left Door Panel(F) and Right Door Panel(G) when necessary.

12.3) Rotate second screw on Connectors(⑨) to adjust in-out position

of Left Door Panel(F) and Right Door Panel(G) when necessary.

Note: There are lead mounting positions on Left Side Panel(B)

and Right Side Panel(C) to attach Connectors(⑨).

NOTE

12.3

①

⑨

⑥

⑬

J

③ ③

12.2 12.1

⑨

⑨

⑥

⑬

⑬

B

C

F

G

⑪

J

Noble house Home Furnishings LLC Page 11 OF 14

Step 14

Usage For Cabinet Restraint Device:

For TV Cabinet against wall, attach two Metal Brackets(⑯) on wall

and product, use Cabinet Restraint Strap(⑳) to connect the Metal

Brackets(⑯).

Instructions:

14.1) Turn the TV Cabinet so the back side faces you.

14.2) Attach Metal Brackets(⑯) to Back Panel(H),where Labeled

using Pan Head Screws(⑲) with Screwdriver(⑬).

！ WARNING

Serious or fatal crushing injuries can occur from tipping furniture.

To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint

Device.

See product instructions for more ways to help prevent furniture tip-over.

① ③ ③

⑯

⑬ ⑲

⑯

⑯

H

14.2

Noble house Home Furnishings LLC Page 12 OF 14

Step 15

Step 16

Step 17

Step 18

Your TV Cabinet is ready for use.

This TV Cabinet can only be used on a flat, level surface.

Move TV Cabinet to the wall.

Pull the Restraint Straps(⑳) through the Metal Brackets(⑯) on the wall

and TV Cabinet one by one, and pull the Restraint Straps(⑳) tight.

Attach Metal Brackets(⑯) to Wall Plugs(⑰) using Wall Plug

Screws(⑱) with Screwdriver(⑬).

15.1) Drill two holes on wall at same height as Metal Brackets(⑯) on

TV Cabinet with Power Drill(⑮).

You can mark these points in two ways as below:

1) Move the TV Cabinet back to the wall. Mark two points same height

as TV Cabinet on the wall.

Note: The Metal Brackets need to be secured to solid, load

bearing surface. Please use a Stud Finder(not supplied) if needed

to locate the Wall Frame.

2) Measure the height of the Metal Brackets(⑯) with ruler/measuring

tape and mark on wall to keep them accurate and same height.

15.2) Insert Wall Plugs(⑰) into drilled holes on wall with Hammer(⑭).

⑰

⑭

15.2

15.1

⑮ ⑰ ⑰

⑰

⑯ ⑬ ⑱

⑯ ⑯

⑯ ⑯

⑳

⑳ ⑳

Noble house Home Furnishings LLC Page 13 OF 14

Noble house Home Furnishings LLC Page 14 OF 14