1

PLANNING

DESIGNING

NETWORKING

DEVELOPING

2

PLANNING

DESIGNING

NETWORKING

DEVELOPING

Since the company was founded, ECO Schulte

has consistently taken a holistic approach to

the subject of “hardware on the door”. A product system was developed early on that made

the world of doors more secure and more functional. We call that — to quote Aristotle — “the

whole is greater than the sum of its parts”.

Today ECO Schulte offers much more than a

product system. New areas of expertise have

been added to a perfectly harmonised product

range: the overarching design, the networking

of products and the challenge of market- or

order-based product development.

ECO Schulte

3

4

Company Introduction

Much has already been philosophised about the charm

of the family business in contrast to the corporate group.

In our opinion, the main advantages are continuity, decisi

-veness and high flexibility. And a love of doing business.

WE ARE

FAMILY

THE ECO SCHULTE STORY:

5

A family business, an entrepreneurial family: siblings

Tobias Schulte, Andrea Widmann, Heiner Schulte – and

their father Ernst Schulte

(from left).

As a family-managed German medium-sized company with a rich

history spanning nearly 100 years, we take pride in our roots.

Our journey began in 1926 when Heinrich Schulte founded Echt

& Co. in Menden, Germany. Over time, we evolved into the successful ECO brand that is widely recognized

today. Now in its third generation, the Schulte family continues

to guide the company's growth on an international scale.

Our headquarter remains in Menden, while we operate further

production bases in Luckenwalde, Germany, Randers, Denmark

and Zhuhai, China. Additionally, we have established multiple

sales offices across Europe and China, allowing us to serve a

global clientele.

At our core, we specialize in the design, development, and integrated production of complete door systems. From door closers

and handles to hinges, panic devices, locking mechanisms, and

intelligent door management, our expertise covers the entire

spectrum. We maintain our own R&D technology, an international collaborative team, state-of-the-art machinery and equipment, and a CNAS-certified testing center within our factory.

With these resources at our disposal, ECO is fully prepared to be

your trusted partner for system solutions in the door and building industry.

6

ECO History

1926

In 1926, the Echt & Co. company is founded

in Menden. Heinrich Schulte and his business partner. Echt start metal processing

in their own stamping store. Traditional:

The company headquarters are still located in Menden today.

The company began producing plastic fittings and door hinges for fire doors. Innovative: Among the first product lines are already

plastic fittings with steel core.

1970s

Company founder Ernst Schulte renames

the company ECO Schulte GmbH & Co.

KG. Thus the ECO brand is born, which has

successfully established itself on the market to this day. Value-driven: ECO Schulte

is a family business with the mission to

redefine system technology at the door

and make it safer.

1980s

The subsidiary ESB is founded in Luckenwde near Berlin. From now on, stamped andformed parts are produced and plastic paare processed here. In 1989, the lock factoGBS in Schwelm is taken over. Consistent:This lays the foundation for the production of holistically coordinated hardware

systems.

ECO Schulte and opens ECforeign subsiECO

HISTORY

1950s

6

7

wald

rts

ory

:

1990s

begins internationalization

CO Schulte Sp. z o.o., its first

idiary, in Wypedy, Poland.

2003

With the founding of ECO Schulte Doorsystems Zhuhai Co. Ltd.in Zhuhai, the leap into

China succeeds.Innovative: The modern

manufacturing technologies in Zhuhan fit

perfectly into the company's production

chains.

2014

ECO Schulte takes over the Danish door

handle manufacturer Randi A/S - and

thus continues the planned internationalization.Design-oriented: The Randi A/S

program also includes designs from Scandinavian architectural firms and is subsequently perfectly adapted to European

standards and door technology.

2026

The future is in sight.

We are 100 years ！

7

8

Production

9

BECAUSE WE

ALSO PRODUCE

When entering our markets as a system provider, it is vital to have a deep understanding

of all the components involved. At the core of

our company's network concept is the commitment to fulfill specific core competencies

through our in-house production capabilities.

ECO Schulte takes pride in operating its own

production facilities, both in Europe and China.

10

Project Reference

German quality, design and functionality have been decisive

factors in our international success. Our philosophy of system

security and reliability in the door is to be found as much in

contemporary architecture.

BECAUSE SERVICE

MEANS

„GOING GLOBAL“

HK-Zhuhai-Macao Bridge, Zhuhai

BVLGARI hotel, Dubai

Sports Hub, Singapore

11

Hysan Place, Hongkong PUMA Herarau headquarter,Germany

Daxing International Airport, Beijing

12

PROJECT

REFERENCE

Hotel

Healthcare

Commerce

Public

Project Reference

12

13

Around the world, builders and investors are realizing demanding projects together with

architects and planners. Clever solutions for doors are always in demand.

Nowadays ECO offers solutions for all kind of project types such as Hotel, Healthcare,

Commerce, Residential, Public, Industry, Transportation and Education.

Industry

Residential

Education

Transportation

13

14

14

Door closer teHinge technology

Intelligent door management

Fitting technology

SAFETY IS INTEGRAL

THE ECO SYSTEM

The world of ECO Schulte

14

15

echnology

Panic & locking technology

We selecting door components with the guarantee of absolute compliance with

standards. This involves configuring the hardware on the door and ensuring

everything fits together according to the relevant standards.

15

16

17

18

DOOR CLOSERS WITH SLIDE RAIL

ECO NEWTON

ER = Stainless steel, Al = Aluminium

Tests / standards

ECO Newton TS-62

(EN 2-5)

ECO Newton TS-61

(EN 3-6)

ECO Newton TS-41

(EN 1-4)

ECO Newton TS-31

(EN 1-3)

ECO Newton TS-33

(EN 3)

ECO FTS III

(EN 3-6)

Door closer technology

18

19

DOOR CLOSERS WITH STANDARD ARM

ECO NEWTON

ECO TS-10 D EN

(EN 2/3/4)

Tests / standards

ECO Newton TS-50

(EN 2–6)

ECO Newton TS-14

(EN 1/2/3/4)

ECO Newton TS-20

(EN 2/3/5)

ECO Newton TS-14 EN

(EN 2/3/4)

ECO TS-10

(EN 2/3/4)

ECO Newton TS-15

(EN 2/3/4/5)

19

20

CONCEALED DOOR CLOSER

ECO ITS

FLOOR SPRINGS

ECO BTS

ITS Multi Genius

(EN 1 -4 / EN 2 -5)

ITS 630

(EN 3 -6)

ITS 420

(EN 2 -4)

ITS 380

(EN 3)

BTS FH 650

(EN 3/4)

BTS FH 840

(EN 2/3/4)

Tests / standards

Door closer technology

20

21

SR III door coordinator (B or BG)

SR-EF door coordinator with electro-magnetic hold open (B or BG)

SR-EFR door coordinator with electro-magnetic hold open and smoke detector (B or BG)

DOOR COORDINATORS

ECO SR

SR1

SR2

SR-Basis

Tests / standards

21

22

Door closer technology

ECO Newton TS-61

THE AESTHETE

ECO NEWTON

The door closer generation from ECO Schulte: a meticulously wellconceived design consisting of a stainless steel cover and aluminium

body. Concealed mounting plates, setting elements protected against

vandalism, colour-coordinated materials and the variable combination

of all slide rail door closers with the closing sequence control systems

characterise this generation of door closer models. In addition, the new

valve technology ECO VALVE guarantees the simple and highly precise adjustment of all parameters of the closing process.

23

1) EN 1154 – CE-mark and fire-protection tested 2) Door closer sizes acc. to European Norm (EN) 3) Increases the closing speed just before

closing to ensure the door closes reliably 4) Regulates the force necessary to open the door (check) from 70° opening angle 5) Regulates

the closing speed (delay) of the door up to 70° opening angle (e.g. for barrier-free passage)

THE SYSTEM OVERVIEW

ECO NEWTON

Door closer with slide rail TS-62 TS-61 TS-41 TS-31 TS-33

Closing force size acc. to

EN2 2-5 3-6 1-4 1-3 3

Door width ≤ 1250 mm ≤ 1400 mm ≤ 1100 mm ≤ 950 mm ≤ 950 mm

Latching speed3     

Closing speed     

Back-check4    - -

Delayed action5   - - -

Tested acc. to EN1

 Continuously adjustable

 Constant

- Not available

Door closer with standard arm TS-50 TS-20 TS-15 TS-14 EN TS-14 TS-10 D EN TS-10

Closing force size acc. to

EN2 2-6 2/3/5 2/3/4/5 2/3/4 1/2/3/4 2/3/4 2/3/4

Door width ≤ 1400 mm ≤ 1250 mm ≤ 1250 mm ≤ 1100 mm ≤ 1100 mm ≤ 1100 mm ≤ 1100 mm

Latching speed3       

Closing speed       

Back-check4   - - -  -

Tested acc. to EN¹ - - -

 Continuously adjustable

 Constant

- Not available

24

The ECO Newton door closer portfolio covers all door dimensions with only

two basic units. In addition, end-mounted valve technology permits the door

closer to be installed on the pull and push side in normal or transom installation (TS-41/31).

Two bodies for the whole building.

Elegant materials are standard with ECO Newton: The stainless steel cover

and aluminium body unit of the new door closer generation are perfectly

matched with one another – in an architecturally compatible form language.

Combination of elegant materials

ECO CLIC envelops the aluminium body unit with the power of spring steel.

The cover conceals all of the adjusting elements and cannot be removed

without tools, thus securing the closer against unauthorised access.

Intelligent stainless steel cover

UNITY

PHYSIS

The new ECO VALVE valve technology offers a wide and precisely adjustable

setting range. This means the simple, high-precision and permanently secure

adjustment of all parameters of the closing process using a conventional

Allen key. As with all ECO Newton door closers, the closing speed and latching speed are regulated via the ECO VALVE as a standard feature. An additional valve stop prevents the valves being overtightened or screwed out.

Innovative valve technology

VALVE

CLIC

The special feature of the ECO Newton assembly system is that the mounting plate is completely concealed by the aluminium body of the closer, thus

making it invisible. The mounting plate has standardised drill holes which

guarantee time-saving, secure and straightforward attachment.

Well-conceived assembly system

MOUNT

THE HIGHLIGHTS

ECO NEWTON

Door closer technology

25

The mounted slide rail and door closer are flush when the door is closed. All

materials are perfectly colour-matched – right through to the end caps on

the slide rail. In this way, ECO Newton door closers can be integrated harmoniously into every design context.

Uniform finishing edge and colour design

ECO Newton door closers are up to 1,000 grams lighter than comparable

solutions. Their intelligent construction and carefully planned use of materials make a considerable contribution to saving resources – without compromising functionality, safety, security or quality.

Saves resources

The full cover is an optional stainless steel cover for the ECO Newton door

closer and the respective slide rail. The overall appearance is perfected by a

lever arm with a stainless steel finish. A cover on the closer body is available

for standard arm closers.

Stainless steel full cover

The ECO Newton VARIO concept permits the use of all slide rail door closers

and can even be combined with different door leaf widths. In this way, optimum value for money can be achieved for each individual door situation.

Combination talent

As with all ECO Schulte products, the door closers are manufactured in a

quality management process certified in accordance with ISO 9001. This

guarantees that top quality is produced and installed. Many door closer variants are suitable for use on fire and smoke protection doors – and tested in

accordance with EN 1154. All products which are tested in accordance with

valid European directives are identified by the CE mark.

Standardised quality

LINE

GREEN

COVER2

VARIO

26

27

28

ROSE HANDLES (ROS)

SHORT PLATE HANDLES (K)

LONG PLATE HANDLES (L)

OVAL ROSE HANDLES (OVR)

Tests / standards

DIN 18273

Bearing technology

D-110 D-210 D-310 D-330

D-410 D-510

D-115 OVR D-116 OVR D-310 OVR D-315 OVR

D-335 OVR D-410 OVR D-415 OVR D-515 OVR

Fitting technology

28

29

ROSE HANDLES (ROS)

OVAL ROSE HANDLES (OVR)

BGL

Tests / standards

DIN 18273

Basic friction bearing technology

D-2310

D-2610

D-2650

D-2690

D-2740

D-2820

D-2880

D-2340

D-2620

D-2660

D-2710

D-2750

D-2830

D-2930

D-2110

D-2410

D-2630

D-2670

D-2760

D-2720

D-2850

D-2940

D-2210

D-2510

D-2640

D-2680

D-2770

D-2860

D-2730

D-2110 OVR D-2210 OVR D-2310 OVR D-2760 OVR 29

30

ROSE SET

Security rose set PZ Rose set with PZ-hole Rose set UG

SK

AV

WC-Set AV / SK

KNOBS

K-130 K-135 K-165 K-160 OVR

S-110 S-310 S-330 S-420

Fitting technology

PUSH-PULL HANDLES

SPINDLES

Spindles for standard

handles

Grooved spindles Spreaded spindle

30

31

32

Fitting technology

TIMELESS AND

ELEGANT FORMS

Classic handle with added value: the advantage of the U-shaped handle

lies in its second 90 degree bend. It was used traditionally to prevent

people or material from getting “threaded on”. The rear bend of the

handle helps to prevent shopping bags or coat sleeves from getting

caught on the handle. In addition, the U-shaped handle has comfort

qualities, because the rear turn supports the ball of the hand when the

door is opened. ECO-Schulte has the U-shaped handle in its product

range as factory design draft D-110.

ECO D-100 archetype: U-shaped handle

In their efforts to lower house construction prices and rents in the

1920s, many architects became involved in the standardisation of construction components. The ECO D-200 is a variation of the draft that

once made a name for itself as the Frankfurt standard handle where a

round rod was bent by 90 degrees and positioned on a simple rose. All

of the Frankfurt versions are based on the idea of the right angle. ECOSchulte has included the Frankfurt standard handle in its product range

in a high-quality modern interpretation as factory design draft D-210.

ECO D-200 archetype: Frankfurt standard L-shaped handle

The ECO D-300 is a variation of a geometric handle draft design from

the 1920s and stands out through the legible simplicity of the construction: a circular tube is separated with a mitred cut. The two halves are

then joined together again at right angles. This handle was given the

attribute “Frankfurt” not only through its close geometric relationship

with the Frankfurt standard handle but also because it was used when

the Frankfurt Architecture Museum was built. ECO Schulte has included

its interpretation of the Frankfurt mitred handle in its product range as

factory design draft D-310.

ECO D-300 archetype: Frankfurt mitred handle

ECO D-110

ECO D-210

ECO D-310

33

Made for getting to grips with! The archetype of this U-shaped handle

was named after the Ulm School of Design where it was first used in the

1950s. The draft was based at the time on the door handles of trains

run by the Swiss railway. ECO Schulte reworked the Ulm handle with its

own factory design draft D-410.

ECO D-400 archetype: Ulm handle

As far as the typology is concerned, this handle constitutes an ergonomic connection between the Frankfurt mitred handle and the Ulm

handle. The design of this factory design draft D-510 is discreet, easy to

grip and oriented towards the direction of movement.

ECO D-500 archetype: Hand-shape handle

ECO D-410

ECO D-510

34

GOOD, BETTER, BEST:

QUALITY BEARINGS WITH A

SYSTEM

OKL-bearing

These high-end project handles are characterized by an industrial ball

bearing. The precise and maintenance free ball bearing technology

ensures a well-balanced system. Additionally the flex-bearing, lying

inside the ball bearing unit, balances uneven door surfaces for up to 3

degree. This premium and innovative solution will meet all standards

for private or public doors.

n EN 1906, class 4

n With spring and 90 degree carrier

n Patented flex-bearing unit

n 1 million cycle tested

OKL - Premium handles with ball-bearing technology

OGL-bearing

The main characteristic of this handle is a maintenance free nylon

bearing that is floating on the steel base rose and balancing radial and

axial free-play. This class 4 handle bearing can be used on doors with

high frequency and a potential for violent usage such as in schools or

football stadiums.

n EN 1906, class 4

n Unsprung

n 200,000 cycle tested

OGL - Handles with friction bearing technology

Fitting technology

35

SGL-bearing

The bearing made of glass fiber reinforced nylon is guiding the handle

axial as well as radial. A wave spring is compensating angular tolerances. A perfect and certified price/performance ratio for frequently used

handles in all kind of buildings.

n EN 1906, class 3

n With spring

n 200,000 cycle tested

SGL - Handles with standard friction bearing technology

BGL - Handles with basic friction bearing technology

BGL

1) applies only to D-2110, D-2210, D-2310, D-2340, D-2510

BGL-bearing

The steel base rose and return spring ensure a proper and stable fixing

on the door. The economic bearing is perfect for interior doors in public

buildings or private houses.

n EN 1906, class 21

n With spring

n 100,000 cycle tested

36

37

38

Guardian EPN 2000 II

Guardian EPN 3000 EN

Guardian EPN 2000 III

Panic & locking technology

Panic bar systems n Touchbar

PANIC BAR SYSTEMS

ECO GUARDIAN

Tests / standards

38

39

Guardian EPN 900 IV (Stainless steel) Guardian EPN 900 IV (Aluminium F1)

Guardian EPN 900 IV (Black / red) Guardian EPN 950

Panic bar systems n Pushbar

PANIC BAR SYSTEMS

ECO GUARDIAN

Tests / standards

39

40

GBS 90 GBS 92 GBS 96 GBS 96 AVP GBS 130

PANIC LOCKS

FOR SINGLE LEAF DOORS

Tests / standards

GBS 93 GBS 94 GBS 94 RSK GBS 97 GBS 97 AVP GBS 98 GBS 152 ETÖ

DUAL LOCKING DEVICE

FOR DOUBLE LEAF DOORS

GBS 190 GBS 198 GBS 199

Panic & locking technology

40

41

GBS 31F SH

Sash lock

GBS 31F RL

Roller latch lock

GBS 31F DB

Dead lock

GBS 31F UR

Latch lock

GBS 31F NL

Nightlatch lock

GBS 31F WC

Bathroom lock

GBS 31F SUR

Single latch lock

GBS 31F SDB

Single dead lock

GBS 31F NR

Noise reduction

lock

GBS 31F SWC

Bathroom

deadbolt

GBS 31F

Tube well lock

STANDARD LOCKS

FOR SINGLE LEAF DOORS

Tests / standards

GBS 140 GBS 187

ECO 510 GBS 81 GBS 94F

Profile sash lock

41

GBS 190 GBS 198 GBS 199

42

Panic & locking technology

A panic lock works according to a defined principle: If the lever handle or panic bar on the inside is operated,

the lock must open promptly under a defined application of force. In this case, not only the latch is drawn back,

but also the locked bolt if necessary. This basic function can be refined and varied using ECO technology.

PANIC LOCK

FUNCTIONS

Knob-lever function

Panic function E

Panic function E is designed for buildings with access for a defined

group of people. There is a blind plate or knob fitted on the outside, the door can only be opened by key. Classic panic function

via the lever handle on the inside.

1

2

Panic function D is designed for pure escape doors which are not

otherwise used: Following a classic panic operation from the inside

the door is not only opened, the outer lever handle is engaged as

well. In this setting, the door is no longer an obstacle for entry to

nor escape from the building. The original function can be restored

by a key. Engagement takes place mechanically through a two-part

follower.

Fire brigade function

Panic function D

Panic function C with a lever handle on both sides is designed for

buildings accessible to the general public: Whereas the lever handle on the inside has a classic panic function, the lever handle on

the outside is usually disengaged (idle function) and can only be

disengaged and engaged through a key position (opening position)

(forced closing). However, the key can only be removed when the

idle function has been restored.

Forced closure function

Panic function C

Panic function B with a lever handle on both sides is designed

for buildings accessible to the general public: Whereas the lever

handle on the inside has a classic panic function, the lever handle on the outside can be disengaged or engaged mechanically

as required. Engagement of the two lever handles takes place

mechanically through a two-part follower.

Switchover function

Panic function B

43

The type of room and utilization of the building are decisive when choosing the right panic door combination.

European standards DIN EN 1125 and DIN EN 179 define the fittings of panic doors and emergency exits.

Emergency exit locks in compliance with DIN EN 179 are not normally subjected to use by the general public.

It is assumed here that the users of the building are acquainted with the escape routes, so conventional

panic lock technology with a handle or impact plate are sufficient here. Panic locks with a horizontal activation bar in accordance with DIN EN 1125, on the other hand, are intended for use in buildings frequented by the

general public. Our panic systems in conformance with DIN EN 1125 ensure that persons who have panicked

and are not acquainted with the functions of the door can always get out of the building safely.

Emergency exit

locks with

door handle

Emergency exit locks in accordance with DIN EN 179 for buildings or building sections not open to the general public and all

areas where access by the general public can be excluded. Side

entrances or doors in these buildings or building sections are only

used by authorized persons.

Emergency exit locks operated mechanically by means of a handle or impact plate.

Areas of application:

n Private residential complexes

n School classrooms

n Non-public administration buildings or industrial companies

n Non-public areas of administrative buildings

n Non-public areas of airports, banks, shopping centres

Users have advance knowledge of how to open the escape door.

Panic locks with

a horizontal

activation bar

Panic locks in accordance with DIN EN 1125 are used in public

buildings in which the users are not acquainted with the functioning of the escape door but must nevertheless be able to operate

them without instruction.

Panic locks activated mechanically by means of a horizontal

handle or push-bar.

Areas of application:

n Hospitals and clinics

n Escape routes in schools and training centres

n Public administration buildings

n Stadia, arenas and events buildings

n Shopping centres

Users have no advance knowledge of how to open the escape

door.

NORMS DEPENDING ON

BUILDING USE

Seminar room Meeting

room

Recreation room

Office Office IT

Toilet Kitchen

Office Office

Seminar room

Public area Non-public area

44

45

46

OBJECT HINGES ECO HORIZON

OBN-20, OBN-18 AND OBN-14

OBJECT HINGES ECO HORIZON

OBX-20, OBX-18 AND OBX-14

Tests / standards

Tests / standards

Hinge technology

OBX-20-1531/160

3D Hinge

OBX-20-2541/160

3D Hinge

OBX-20-2542/160

3D Hinge

OBX-18-1531/160

3D Hinge

OBX-18-2541/160

3D Hinge

OBX-18-1531/120

3D Hinge

OBX-18-1534/160

3D Hinge

OBX-18-2541/120

3D Hinge

OBX-14-4526

3D Hinge

OBN-20-4141/160

Butt Hinge

OBN-18-4141/160

Butt Hinge

OBN-14

C-hole Butt Hinge

OBN-14

Z-hole Butt Hinge

OBN-18-4141/120

Butt Hinge

46

47

OBJECT HINGES OBN-13 SERIES

CONCEALED OBJECT HINGES OBC SERIES

ADJUSTABLE FRAME BOXES,

COVER PLATES AND LIFTING LUG

OBX Lifting Lug

For OBX-hinges

OBN-13-433H/102

Rising Hinge

OBN-13

Security Hinge

OBN-18-5503Q/127

Flag Hinge

OBN-13

Butt Hinge

OBN-18

Spring Hinge

OBC-25-1440/150Z-3D OBC-28-1640/177Z-3D OBC-34-1845/246Z-3D OBC-29-1940/112SS-2D OBC-30-1840/140SS

OBX-3102-3D OBX-3105-3D OBX- OBX-3121-3D OBX-3196

3011/3012

OBX-3101-3D

OBN-13-4325ZM/102

Flush hinge

48

Hinge technology

PERFORMANCE

WEIGHTS AND LOADS

Door hinges are highly stressed construction elements: they not only have to bear the weight of the

door itself, but much higher loads as well, depending on where they are used. Frequent door opening,

slamming and unusual treatment of doors as in

barracks or schools can make conventional hinges

reach their load limit if they are simply designed to

cope with the door weight.

ECO Horizon hinges have a closed hinge roller which

prevents the roller bending open. No compromises

have been made with the material thickness of the

hinges either: the hinge plates of the ECO Horizon

hinges can bear loads of up to 300 kg per hinge.

Assuming proper installation of the door, the

material strength of the construction element to

be attached and a frictional connection with the

masonry: ECO Horizon hinges should be selected

and used according to the above table with sufficient

load and safety reserves for special areas of use as

well. When ECO Schulte systems are used, a third

hinge is only required under really difficult conditions. A third hinge that is attached in the top third

of the door frame can increase the load-bearing

capacity of the hinges by around one third.The data

in the table refer to a door leaf size of 2 x 1m, the use

of two hinges and professional installation.

The numerous individual selection criteria such as

areas of use, frequency of door passage etc. cannot

be taken into account when determining the values.

For this reason we recommend including safety

reserves in the calculation and the selection of corresponding hinges to protect individuals.

We will be happy to help if you have any queries.

The values given were established under 100 % testing laboratory conditions on 2 m high and 1 m wide doors as per EN 1935. Please remember this when selecting the object hinge or contact us for further details.

Maximum door weight of ECO Horizon object hinges

Stop Max. door weight: 300 kg Max. door weight: 200 kg Max. door weight: 160 kg Max. door weight: 120 kg

rebated

notch

OBX-20-1531/160

OBX-20-1532/160 FD

OBX-20-1531/120

OBX-20-1532/120

OBX-20-1951/160

OBX-18-1531/160

OBX-20-1951/120

OBX-18-1532/160

OBX-18-1531/120

unrebated

notch

OBX-20-2541/160

OBX-20-2542/160

OBN-20-4141/160

OBX-20-2541/120

OBX-20-2542/120

OBX-18-2541/160

OBN-18-4141/160

OBN-14-E-C

OBN-14-E-Z

OBN-14-R-C

OBN-14-R-Z

OBX-18-2541/120

49

PREMIUM

BALL BEARINGS

The quality of a hinge is determined to a great extent by the quality of

the bearing. That is why ECO Schulte has developed its own bearing

technology for its object hinges (patent: DE 103 61 548.2). The bearing is characteristic: the roller is guided top and bottom on a steel ball

in two high-strength plastic cases. This specific bearing is wear-free,

maintenance-free and clearance-free and guarantees smooth running

of the door. The double bearing controls axial and radial forces effectively and permanently. In a series of practical tests, this bearing technology was successfully tested by an independent institute for more

than one million closing actions. That more than guarantees lifelong,

secure fastening.

Roller frame

Roller leaf

Ball case leaf

Steel ball

Ball case frame

50

Hinge technology

ADVANTAGES

ECO HORIZON

50